4in1 für alten intel chipsatz

Hannnibal

Admiral Special
Mitglied seit
27.03.2003
Beiträge
1.804
Renomée
5
Hi,
Ich hab ncoh einen alten PC (PII 400). Nach der installation von winxp funktionieren
die usb schnistellen leider nicht. Es ist ein Siemens X-Pert 4000 mit eine vt -6xx chip(ich kann ja mal nachgucken falls erforderlich).
THX

PS
in der syssteuerung ist ein usb host controller.
 
Original geschrieben von Hannnibal
Hi,
Ich hab ncoh einen alten PC (PII 400). Nach der installation von winxp funktionieren
die usb schnistellen leider nicht. Es ist ein Siemens X-Pert 4000 mit eine vt -6xx chip(ich kann ja mal nachgucken falls erforderlich).
THX

PS
in der syssteuerung ist ein usb host controller.

Hannibal,

I will take this in English if you don't mind. Kindly consult first your System manufacturer if your system is tested with WinXP, you might need to update your system BIOS. As for the USB Support, make it sure that USB in the BIOS is enabled and normally WinXP has already USB driver bundled. Thanks
 
thanks,
its enabled by bios.
on the machine runs winxp and winme.
with me everything runs good only xp dosen´t support usb.
The winxp driver is is intallled see:
in der syssteuerung ist ein usb host controller
.
the board is an oem production.
But are the 4in1 driver working on this old board?
thx
 
Zuletzt bearbeitet:
Original geschrieben von Hannnibal
thanks,
its enabled by bios.
on the machine runs winxp and winme.
with me everything runs good only xp dosen´t support usb.
The winxp driver is is intallled see:
.
the board is an oem production.
But are the 4in1 driver working on this old board?
thx

Hannibal,

Yes VIA 4in1 driver do support older VIA Chipset. Thanks
 
Zurück
Oben Unten