CoreCycler

Download CoreCycler v.0.9.4.2

pipin

Administrator
Teammitglied
Mitglied seit
16.10.2000
Beiträge
24.365
Renomée
9.689
Standort
East Fishkill, Minga, Xanten
  • SIMAP Race
  • QMC Race
  • RCN Russia
  • Spinhenge ESL
  • Docking@Home
  • BOINC Pentathlon 2019
  • SETI@Home Intel-Race II
  • THOR Challenge 2020
  • BOINC Pentathlon 2021
  • BOINC Pentathlon 2023
CoreCycler - Skript zur Stabilitätsüberprüfung von AMD Ryzen Prozessoren

Mit diesem kleinen Script kann man die Einstellungen des Curve Optimizer für jeden einzelnen Kern seiner CPU auf
Stabilität überprüfen.

Das Script startet Prime95 mit einem Worker-Thread und setzt die "Affinity" von Prime95
abwechselnd auf die einzelnen Kerne, d.h. es wird immer nur ein einziger Kern gleichzeitig belastet, wodurch sehr gut
die Stabilität der Curve Optimizer Einstellung ausgetestet werden kann.

Beim ersten...

Hier geht es zum Download...
 
pipin aktualisierte CoreCycler mit einem neuen Updateeintrag:

CoreCycler v0.8.0.0

  • Updated Prime95 to 30.5 build 2
  • Support for Aida64 and Y-Cruncher! You can now define which stress test program to use (Note: see the readme.txt for more infos on Aida64)
  • Restructured the config file to support Aida64 and Y-Cruncher. Old config files will not work!
  • Added a new "suspendPeriodically" setting, which is activated by default. This setting tries to simulate load changes by periodically suspending and resuming the stress test program
  • Added a new...

Lese den Rest der Aktualisierung...
 
pipin hat CoreCycler mit einem neuen Updateeintrag aktualisiert:

CoreCycler v0.8.0.1

  • Added an auto option for the runtimePerCore setting. With this option all FFT sizes of the selected preset will be tested for one core before it continues to the next core, where it will also test all the FFT sizes, etc.
    For y-Cruncher and Aida64 the "auto" mode uses a fixed runtime of 10 minutes per core due to the lack of detectable progress.
  • You can now also enter a custom FFT range for the FFTSize setting in the Prime95 section, e.g. something like 36-1344. This eliminates...

Lies den Rest der Aktualisierung…
 
pipin hat CoreCycler mit einem neuen Updateeintrag aktualisiert:

CoreCycler v0.8.2.0

  • Apparently there was a bug in Prime v30.4 & 30.5 that could lead to incorrect fatal errors. Updated to Prime 30.6 build 4, which should have fixed this issue according to the developer (see here: https://www.mersenneforum.org/showpost.php?p=577388&postcount=274)
  • Added a final summary when terminating the script
  • The script now prevents sleep/hibernate/standby while it is running

Lies den Rest der Aktualisierung…
 
pipin hat CoreCycler mit einem neuen Updateeintrag aktualisiert:

CoreCycler v.0.9.2.0

  • Updated to Prime95 30.8b17
  • Updated to y-Cruncher 0.7.10 Build 9513
  • Added BoostTester and PBO2 Tuner in the /tools directory, and also added a readme.txt there that describes what the various tools are doing
  • Added support for AVX-512 in Prime95. This will only run on supported CPUs (like Ryzen 7000). You can activate it by selecting AVX512 as the mode in the config file
  • Fixed a bug with the detection of the Prime95 log file

Lies den Rest der Aktualisierung…
 
pipin hat CoreCycler mit einem neuen Updateeintrag aktualisiert:

CoreCycler v.0.9.3.0

  • Added support for setting the tests for y-Cruncher
  • Added support for setting the allocated memory for y-Cruncher
  • Added a disableCpuUtilizationCheck setting to disable the periodic CPU utilization check (this should only be used if there are problems with it)
  • Added BoostTesterMannix.exe in the /tools directory which should produce slightly higher boost clocks

Lies den Rest der Aktualisierung…
 
pipin hat CoreCycler mit einem neuen Updateeintrag aktualisiert:

CoreCycler v.0.9.4.0

  • Updated PBO2 Tuner to version 1.1-beta
  • Added a new [Debug] config section with the following settings:
    • disableCpuUtilizationCheck
    • enableCpuFrequencyCheck
    • tickInterval
    • delayFirstErrorCheck
    • stressTestProgramPriority
    • stressTestProgramWindowToForeground
    • suspensionTime
      See the config file for a description of the various settings
  • The disableCpuUtilizationCheck has been moved to this [Debug] section from [General], so the old setting will not...

Lies den Rest der Aktualisierung…
 
Zurück
Oben Unten