HP Elitebooks 7x5 G6

Yoshi 2k3,

welche RAM-Module sind bei deinem Gerät verbaut?

Ah uh oh. Top of the Line. Sozusagen, aber warum jetzt noch Picasso?

Ich hatte die Bestellung des Gerätes wieder storniert, weil ich wusste, dass ich für ein paar Wochen wenig Lust und Zeit zum Basteln haben würde.
Von HP gab und gibt es noch immer kein Renoir-Gerät, das ich kaufen würde. Aus diesem Grund habe ich das G6 noch einmal bestellt und heute wurde es geliefert. Außerdem habe ich die HP UltraSlim Docking Station (D9Y32AA#ABB), die ich nicht missen möchte. Den notwendigen Anschluss hat die Generation 7 nicht mehr.

Die Konfiguration 6XE88EA#ABD macht Spaß. Das LTE-Modem ist bestellt, ein AX200-Modul liegt bereits hier.
 
Super, vielen Dank.

Ich habe das Gerät gestern Abend als Retoure zurückgeschickt. Mir war am Freitagabend bei wenig Licht nicht aufgefallen, dass die Verarbeitung an zwei Stellen überhaupt nicht gut ist. Unterhalb der Leertaste befindet sich eine ziemlich üble Kerbe. Sehr klein, aber bei einem Neugerät für über 1000 Euro will ich das nicht haben.

Eine Frage noch zur SIM-Karte. In den QuickSpecs (c06335125.pdf) steht folgendes:
All units have a SIM card slot and icon but units that do not support WWAN are shipped with a non-removable SIM slot plug
Das kann wohl kaum stimmen!?
 
Warum nicht? Geräte, die nicht für WWAN vorbereitet sind, haben die Öffnung im Gehäuse, welche aber mit einem Dummy verschlossen ist, der nicht entfernt werden kann. WWAN vorbereitet ist die Config aber, denn die Antennen etc. sind verbaut.

 
Aber du hast doch eine LTE KArte nachgerüstet, also vermutlich auch eine Sim-Karte reingesteckt.. das spricht doch dann gegen einen Nicht entfernbaren Dummy, oder?

Wäre ein ziemlich dämliche Option.
 
Ja, vorsicht mit den Bezeichnungen

Mit WWAN ausgerüstet ab Werk, WWAN vorbereitet (so wie "unser" Modell) und scheinbar für andere Märkte noch eine Variante, die keine Antennen hat und somit auch nicht ohne riesigen Aufwand nachgerüstet werden kann
 
Herzlichen Dank, ich hatte den Hinweis nämlich wie folgt aufgefasst:
Ist ab Werk kein LTE-Modem verbaut, dann steckt ein nicht entfernbarer Dummy in dem Schlitz.


Ich habe mir das bei dem gelieferten Gerät gar nicht angeschaut, da es sich nur 24 Stunden in meinem Haushalt befand - und davon 12 Stunden als fertige Retoure.
 
Zuletzt bearbeitet:
So, das erste Mal per USB-Stick aufgespielt. Funktioniert noch alles wie erwartet ;-)
 
Neues BIOS 01.07.01 steht bereit.


TITLE: HP BIOS and System Firmware (R74)
VERSION: 01.07.01 REV: A PASS: 1

DESCRIPTION:
This package creates files that contain an image of the System BIOS (ROM) for the supported HP EliteBook 700 G6 models with an R74 family ROM. This package is used to flash the System ROM on a supported notebook.

PURPOSE: Recommended
SOFTPAQ FILE NAME: sp110770.exe
SOFTPAQ MD5: 5ee1d5ae996f5fb5e46c13dffd718a8e
SUPERSEDES: SP107599
EFFECTIVE DATE: November 06, 2020
CATEGORY: BIOS
SSM SUPPORTED: Yes

PRODUCT TYPE(S):
Notebooks
HARDWARE PRODUCT MODEL(S):
HP EliteBook 735 G6 Notebook PC
HP EliteBook 745 G6 Notebook PC

OPERATING SYSTEM(S):
Microsoft Windows 10 All Editions (64-bit)

LANGUAGE(S): Global

ENHANCEMENTS:
- Adds public WMI support to get battery information via third party software.
- Provides the Critical Security Update.

- Includes the following firmware:
EC/SIO Firmware, version 57.35.00
Cypress Power Delivery (PD) Firmware, version 2.2.0
AMD Legacy vBIOS, version 48929.001
AMD GOP EFI Driver, version 2.8.0.0.0
PXE Option ROM, version 2.01
PXE UEFI Driver, version 2.45
Camera Firmware, version 678FUR 2.0


- Fixes an issue where the charge LED status light continues to flash after the battery is fully charged.
- Fixes an issue on a Thunderbolt-enabled system connected to a HP USB-C Dock G5 with 2 external hi-resolution enabled monitors where the monitors are not detected in Device Manager when the dock is disconnected and then reconnected.
- Fixes an issue where the display does not function properly when the system is connected to an Apple XDR monitor.
- Fixes an issue where Secure Erase does not execute properly when the display is changed to a non-English language.
- Fixes an issue where the HP Sure start Recovery screen is unexpectedly displayed when Sure Start BIOS Setting Protection is enabled.
- Fixes an issue where the Windows Hotkey function are activated when certain letters (such as Q, W, or E) are pressed after function keys F1 to F5 are pressed continuously.
- Fixes an issue that occurs in Excel where the Shift+F11 hotkey combination does not insert a new spreadsheet.
- Fixes an issue where the boot order priority cannot be changed by the option, Restore current settings from USB device.
- Fixes an issue where certain Japanese characters do not display correctly in the HP Diagnostics tool.
- Fixes an issue where the item, UUID (Standard format), does not translate correctly to a non-English language.
- Fixes an issue where the system randomly displays a Sure Start Recovery error when the system is powered on.
- Fixes an issue which causes the system to enter hibernation unexpectedly.
- Fixes an issue where the preview image is colored red when a Zoom video call is started in low light conditions.

PREREQUISITES:

HOW TO USE:
1. Download the file by clicking the Download or Obtain Software button and saving the file to a folder on your hard drive (make a note of the folder where the downloaded file is saved).

2. Double-click the downloaded file and follow the on-screen instructions.

Copyright Copyright (c) 2020 HP Development Company, L.P.
 
Hier noch das Changelog hinterhergeschoben:
TITLE: HP BIOS and System Firmware (R74)

VERSION: 01.16.00 REV: A PASS: 1
DESCRIPTION:
This package creates files that contain an image of the System BIOS (ROM) for
the supported HP EliteBook 700 G6 models with an R74 family ROM. This package is
used to flash the System ROM on a supported computer system.

PURPOSE: Recommended
SOFTPAQ NUMBER: SP113716
SOFTPAQ FILE NAME: sp113716.exe
SOFTPAQ MD5: 5009266ca2491bd186d7234d0b9abd16
SUPERSEDES: SP112421
EFFECTIVE DATE: May 31, 2021
CATEGORY: BIOS
SSM SUPPORTED: Yes

PRODUCT TYPE(S):
Notebooks

HARDWARE PRODUCT MODEL(S):
HP EliteBook 735 G6 Notebook PC
HP EliteBook 745 G6 Notebook PC

OPERATING SYSTEM(S):
Microsoft Windows 10 All Editions (64-bit)

LANGUAGE(S): Global

ENHANCEMENTS:
- Adds the feature, IPv6 during UEFI Boot, to the F10 setup interface which
allows the user to disable IPv6 during the pre-boot phase.
- Provides support for camera and clickpad firmware updates using Windows
Update.
- Adds the Permanent Configuration of Boot Order for external network devices.
- Updates the AMD Picasso Agesa reference code to 1.0.0.C.

- Includes the following firmware:
EC/SIO Firmware, version 57.37.00
Cypress Power Delivery (PD) Firmware, version 2.3.0
AMD Legacy vBIOS, version 48929.001
AMD GOP EFI Driver, version 2.8.0.0.0
PXE Option ROM, version 2.01
PXE UEFI Driver, version 2.45
Camera Firmware, version 678FUR 5.0

FIXES:
- Fixes an issue where the BIOS cannot be rolled back to an older BIOS version
when the update is run from the F10 setup interface using a custom URL.
- Fixes an issue where a Security Device Error message is displayed after the
Power-on Password is enabled.

PREREQUISITES: NONE
HOW TO USE:
1. Download the file by clicking the Download or Obtain Software button and
saving the file to a folder on your hard drive (make a note of the folder where
the downloaded file is saved).

2. Double-click the downloaded file and follow the on-screen instructions.


Copyright (c) 2021 HP Development Company, L.P.
 
Hier stand Blödsinn.
 
Zuletzt bearbeitet:
PRODUCT TYPE(S):
Desktops

HARDWARE PRODUCT MODEL(S):
HP EliteDesk 805 G6 Desktop Mini PC
Da stimmt aber etwas nicht. Falscher Link?
 
O_O

Wie auch immer das passiert ist: Ich hatte heute nicht vor, hier einen Beitrag zu hinterlassen.
 
HP hat Version 01.18.00 veröffentlicht:
- Fixes an issue where the Remote HP PC Diagnostics Execution Physical Presence Interface continues to be displayed unexpectedly.
- Fixes an intermittent issue where Bitlocker does not unlock properly over a network using a certain network configuration.
- Includes the following firmware:
EC/SIO Firmware, version 57.39.00
AMD GOP EFI Driver, version 2.8.0.0.0
AMD Legacy vBIOS, version 48929.001
Camera Firmware, version 678FUR 5.0
Cypress Power Delivery (PD) Firmware, version 2.3.0
PXE Option ROM, version 2.01
PXE UEFI Driver, version 2.45

Download
 
HP Hat Version 01.19.00 veröffentlicht:
- Fixes an issue where the remaining battery capacity is only 64% of full charge when Maximize my Battery Duration is enabled.
- Fixes an issue which causes arbitrary code execution to occur.
- Provides improved security.
- Includes the following firmware:
AMD GOP EFI Driver, version 2.8.0.0.0
AMD Legacy vBIOS, version 48929.001
Camera Firmware, version 678FUR 5.0
Cypress Power Delivery (PD) Firmware, version 2.3.0
EC/SIO Firmware, version 57.39.00
PXE Option ROM, version 2.01
PXE UEFI Driver, version 2.45

Download
 
HP Hat Version 01.19.00 veröffentlicht:
- Includes the following firmware:
[...]
Camera Firmware, version 678FUR 5.0
[...]

Download
Irgendwie schade, dass man das Firmware-Update für die Kamera offenbar zusammen mit allen anderen in ein *.BIN-File gepackt hat.
Das letzte eigenständige Camera Firmware Update war 678FUR 2.0 - gibt es von späteren Versionen auch eigenständige SoftPAQs?
 
Wird sogar direkt per Windows Update verteilt, die Version. Bin mir nicht sicher, ob das mit den vorherigen Versionen auch schon so war.
 
Per Windows Update kommt Version 01.23.00, bei HP selbst gibt's die noch nicht. Also kein Changelog verfügbar bisher.

€dit: Inzwischen bei HP verfügbar, inkl Changelog. Fixt einige Sicherheitslücken.
- Fixes an issue where the BIOS Administrator Password or the Power On Password can be accepted when the password length is less than the Password Minimum Length.
- Addresses security vulnerabilities CVE-2022-27539.
- Addresses security vulnerabilities CVE-2022-27541.
- Addresses security vulnerabilities CVE-2022-43777.
- Addresses security vulnerabilities CVE-2022-43778.
- Includes the following firmware:
AMD GOP EFI Driver, version 2.8.0.0.0
AMD Legacy vBIOS, version 48929.001
Camera Firmware, version P00XRB-B2R (678FUR 6.0)
Cypress Power Delivery (PD) Firmware, version 2.5.0
EC/SIO Firmware, version 57.3D.00
PXE Option ROM, version 2.01
PXE UEFI Driver, version 2.45
 
Zuletzt bearbeitet:
Zurück
Oben Unten