Linux Mint 17.x/Ubuntu 15.10 auf die Schnelle mit AMD GPU für Boinc an den Start bringen.

Linux Mint 17.3
 
Da kann ich leider nicht weiterhelfen.
 
Das hat ja eher was mit dem Treiber zu tun. Ist der vllt. zu alt? Das kann ich mir allerdings bei so einer Distri nicht vorstellen.
 
Hast du den FGLRX per apt-get oder von der AMD-Webseite installiert?
 
Hallo miteinand,

ich bekomme unter Ubuntu 14.04 leider auch nicht das boinc auf der gpu zu laufen.
Konfig: HW: AMD A8-6500 APU
SW: fglrx und boinc aus dem Repo, AMDAPPSDK-2.9-1

im stdoutgpudetect.txt steht nur:
ADL Escape failed.

im stderrgpudetect.txt stehen mehrere Zeile von:
No protocol specified

Was kann ich tun?
 
Wird denn die R3 Grafik vom XServer erkannt (Xorg.0.log)?
Wenn ja, spuckt clinfo deren Fähigkeiten aus?
 
clinfo sagt:
Code:
# clinfo
Number of platforms:                 1
  Platform Profile:                 FULL_PROFILE
  Platform Version:                 OpenCL 2.0 AMD-APP (1800.11)
  Platform Name:                 AMD Accelerated Parallel Processing
  Platform Vendor:                 Advanced Micro Devices, Inc.
  Platform Extensions:                 cl_khr_icd cl_amd_event_callback cl_amd_offline_devices 


  Platform Name:                 AMD Accelerated Parallel Processing
Number of devices:                 1
  Device Type:                     CL_DEVICE_TYPE_CPU
  Vendor ID:                     1002h
  Board name:                     
  Max compute units:                 4
  Max work items dimensions:             3
    Max work items[0]:                 1024
    Max work items[1]:                 1024
    Max work items[2]:                 1024
  Max work group size:                 1024
  Preferred vector width char:             16
  Preferred vector width short:             8
  Preferred vector width int:             4
  Preferred vector width long:             2
  Preferred vector width float:             8
  Preferred vector width double:         4
  Native vector width char:             16
  Native vector width short:             8
  Native vector width int:             4
  Native vector width long:             2
  Native vector width float:             8
  Native vector width double:             4
  Max clock frequency:                 1700Mhz
  Address bits:                     64
  Max memory allocation:             2147483648
  Image support:                 Yes
  Max number of images read arguments:         128
  Max number of images write arguments:         64
  Max image 2D width:                 8192
  Max image 2D height:                 8192
  Max image 3D width:                 2048
  Max image 3D height:                 2048
  Max image 3D depth:                 2048
  Max samplers within kernel:             16
  Max size of kernel argument:             4096
  Alignment (bits) of base address:         1024
  Minimum alignment (bytes) for any datatype:     128
  Single precision floating point capability
    Denorms:                     Yes
    Quiet NaNs:                     Yes
    Round to nearest even:             Yes
    Round to zero:                 Yes
    Round to +ve and infinity:             Yes
    IEEE754-2008 fused multiply-add:         Yes
  Cache type:                     Read/Write
  Cache line size:                 64
  Cache size:                     16384
  Global memory size:                 7588859904
  Constant buffer size:                 65536
  Max number of constant args:             8
  Local memory type:                 Global
  Local memory size:                 32768
  Kernel Preferred work group size multiple:     1
  Error correction support:             0
  Unified memory for Host and Device:         1
  Profiling timer resolution:             1
  Device endianess:                 Little
  Available:                     Yes
  Compiler available:                 Yes
  Execution capabilities:                 
    Execute OpenCL kernels:             Yes
    Execute native function:             Yes
  Queue properties:                 
    Out-of-Order:                 No
    Profiling :                     Yes
  Platform ID:                     0x00007fa2d28c9430
  Name:                         AMD A8-6500 APU with Radeon(tm) HD Graphics
  Vendor:                     AuthenticAMD
  Device OpenCL C version:             OpenCL C 1.2 
  Driver version:                 1800.11 (sse2,avx,fma4)
  Profile:                     FULL_PROFILE
  Version:                     OpenCL 1.2 AMD-APP (1800.11)
  Extensions:                     cl_khr_fp64 cl_amd_fp64 cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics cl_khr_local_int32_extended_atomics cl_khr_int64_base_atomics cl_khr_int64_extended_atomics cl_khr_3d_image_writes cl_khr_byte_addressable_store cl_khr_gl_sharing cl_ext_device_fission cl_amd_device_attribute_query cl_amd_vec3 cl_amd_printf cl_amd_media_ops cl_amd_media_ops2 cl_amd_popcnt cl_khr_spir cl_khr_gl_event

Das Xorg.0.log ist da nicht ganz so klar:

Code:
# cat /var/log/Xorg.0.log
[    74.908] 
X.Org X Server 1.17.2
Release Date: 2015-06-16
[    74.908] X Protocol Version 11, Revision 0
[    74.908] Build Operating System: Linux 3.19.0-43-generic x86_64 Ubuntu
[    74.908] Current Operating System: Linux nas 4.2.0-35-generic #40~14.04.1-Ubuntu SMP Fri Mar 18 16:37:35 UTC 2016 x86_64
[    74.908] Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.0-35-generic root=UUID=517ddb21-f591-4bb1-bf50-1cdc2d20b49f ro radeon.dpm=1 nomdmonddf nomdmonisw nomdmonddf nomdmonisw nomdmonddf nomdmonisw nomdmonddf nomdmonisw
[    74.908] Build Date: 15 January 2016  10:17:33PM
[    74.908] xorg-server 2:1.17.2-1ubuntu9.1~trusty1 (For technical support please see http://www.ubuntu.com/support) 
[    74.908] Current version of pixman: 0.30.2
[    74.908]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    74.908] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    74.908] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 12 19:58:38 2016
[    74.908] (==) Using config file: "/etc/X11/xorg.conf"
[    74.908] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    74.908] (==) ServerLayout "aticonfig Layout"
[    74.908] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    74.908] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[    74.908] (**) |   |-->Device "aticonfig-Device[0]-0"
[    74.908] (==) Automatically adding devices
[    74.908] (==) Automatically enabling devices
[    74.908] (==) Automatically adding GPU devices
[    74.908] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    74.908]     Entry deleted from font path.
[    74.908] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    74.908]     Entry deleted from font path.
[    74.908] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    74.908]     Entry deleted from font path.
[    74.908] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    built-ins
[    74.908] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    74.909] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    74.909] (II) Loader magic: 0x558e88341c80
[    74.909] (II) Module ABI versions:
[    74.909]     X.Org ANSI C Emulation: 0.4
[    74.909]     X.Org Video Driver: 19.0
[    74.909]     X.Org XInput driver : 21.0
[    74.909]     X.Org Server Extension : 9.0
[    74.910] (--) PCI:*(0:0:1:0) 1002:990e:1002:990e rev 0, Mem @ 0xc0000000/268435456, 0xfeb00000/262144, I/O @ 0x0000f000/256
[    74.910] (II) "glx" will be loaded by default.
[    74.910] (II) LoadModule: "glx"
[    74.910] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/extensions/libglx.so
[    74.910] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    74.910]     compiled for 6.9.0, module version = 1.0.0
[    74.910] (II) LoadModule: "fglrx"
[    74.911] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/drivers/fglrx_drv.so
[    74.947] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[    74.947]     compiled for 1.4.99.906, module version = 15.20.3
[    74.947]     Module class: X.Org Video Driver
[    74.947] (II) Loading sub module "fglrxdrm"
[    74.947] (II) LoadModule: "fglrxdrm"
[    74.947] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/linux/libfglrxdrm.so
[    74.949] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    74.949]     compiled for 1.4.99.906, module version = 15.20.3
[    74.949] (II) AMD Proprietary Linux Driver Version Identifier:15.20.3
[    74.949] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-15.201.1151              
[    74.949] (II) AMD Proprietary Linux Driver Build Date: Sep  8 2015 15:06:35
[    74.949] (++) using VT number 7

[    74.949] (WW) Falling back to old probe method for fglrx
[    74.959] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[    74.960] ukiDynamicMajor: found major device number 245
[    74.960] ukiDynamicMajor: found major device number 245
[    74.960] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[    74.960] ukiOpenDevice: node name is /dev/ati/card0
[    74.961] ukiOpenDevice: open result is 9, (OK)
[    79.649] ukiOpenByBusid: ukiOpenMinor returns 9
[    79.649] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[    79.655] (--) Chipset Supported AMD Graphics Processor (0x990E) found
[    79.655] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found
[    79.657] (II) fglrx(0): pEnt->device->identifier=0x558e8963b4b0
[    79.657] (II) fglrx(0): === [xdl_xs117_atiddxPreInit] === begin
[    79.657] (II) fglrx(0): FB driver is enabled
[    79.657] (II) Loading sub module "vgahw"
[    79.657] (II) LoadModule: "vgahw"
[    79.657] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    79.657] (II) Module vgahw: vendor="X.Org Foundation"
[    79.657]     compiled for 1.17.2, module version = 0.1.0
[    79.657]     ABI class: X.Org Video Driver, version 19.0
[    79.658] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    79.658] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    79.658] (==) fglrx(0): Default visual is TrueColor
[    79.658] (**) fglrx(0): Option "DPMS" "true"
[    79.658] (==) fglrx(0): RGB weight 888
[    79.658] (II) fglrx(0): Using 8 bits per RGB 
[    79.659] (==) fglrx(0): Buffer Tiling is ON
[    79.659] (II) Loading sub module "fglrxdrm"
[    79.659] (II) LoadModule: "fglrxdrm"
[    79.659] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/linux/libfglrxdrm.so
[    79.659] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    79.659]     compiled for 1.4.99.906, module version = 15.20.3
[    79.662] ukiDynamicMajor: found major device number 245
[    79.662] ukiDynamicMajor: found major device number 245
[    79.662] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[    79.662] ukiOpenDevice: node name is /dev/ati/card0
[    79.662] ukiOpenDevice: open result is 11, (OK)
[    79.663] ukiOpenByBusid: ukiOpenMinor returns 11
[    79.663] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[    79.663] (**) fglrx(0): NoAccel = NO
[    79.663] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[    79.663] (--) fglrx(0): Chipset: "AMD Radeon HD 8570D" (Chipset = 0x990e)
[    79.663] (--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x990e)
[    79.663] (==) fglrx(0): board vendor info: original AMD graphics adapter
[    79.663] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[    79.663] (--) fglrx(0): MMIO registers at 0xfeb00000
[    79.663] (--) fglrx(0): I/O port at 0x0000f000
[    79.663] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    79.663] (II) fglrx(0): AC Adapter is used
[    79.664] (EE) fglrx(0): Cannot read int vect
[    79.669] (II) Loading sub module "vbe"
[    79.669] (II) LoadModule: "vbe"
[    79.669] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    79.669] (II) Module vbe: vendor="X.Org Foundation"
[    79.669]     compiled for 1.17.2, module version = 1.1.0
[    79.669]     ABI class: X.Org Video Driver, version 19.0
[    79.669] (II) Loading sub module "int10"
[    79.669] (II) LoadModule: "int10"
[    79.670] (II) Loading /usr/lib/xorg/modules/libint10.so
[    79.670] (II) Module int10: vendor="X.Org Foundation"
[    79.670]     compiled for 1.17.2, module version = 1.0.0
[    79.670]     ABI class: X.Org Video Driver, version 19.0
[    79.670] (II) fglrx(0): initializing int10
[    79.670] (EE) fglrx(0): Cannot read int vect
[    79.670] (WW) fglrx(0): GetVBEMode failed
[    79.670] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[    79.670] (--) fglrx(0): Video RAM: 786432 kByte, Type: DDR3
[    79.670] (II) fglrx(0): PCIE card detected
[    79.670] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    79.670] (II) fglrx(0): board/chipset is supported by this driver (original AMD board)
[    79.670] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x30000000)
[    79.670] (II) fglrx(0): RandR 1.2 support is enabled!
[    79.670] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    79.670] (II) Loading sub module "fb"
[    79.670] (II) LoadModule: "fb"
[    79.671] (II) Loading /usr/lib/xorg/modules/libfb.so
[    79.671] (II) Module fb: vendor="X.Org Foundation"
[    79.671]     compiled for 1.17.2, module version = 1.0.0
[    79.671]     ABI class: X.Org ANSI C Emulation, version 0.4
[    79.671] (II) fglrx(0): EDID Management option: EDID Management is enabled
[    79.671] (II) Loading sub module "ddc"
[    79.671] (II) LoadModule: "ddc"
[    79.671] (II) Module "ddc" already built-in
[    79.736] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[    79.736] (**) fglrx(0): Option "PreferredMode" "1024x768"
[    79.736] (II) fglrx(0): Output DFP2 has no monitor section
[    79.736] (II) fglrx(0): Output CRT1 has no monitor section
[    79.736] (II) Loading sub module "ddc"
[    79.736] (II) LoadModule: "ddc"
[    79.736] (II) Module "ddc" already built-in
[    79.736] (II) fglrx(0): Connected Display0: CRT1
[    79.736] (II) fglrx(0):  Display0: Failed to get EDID information. 
[    79.736] (II) fglrx(0): Dynamic Surface Resizing Enabled
[    79.737] (II) fglrx(0): EDID for output DFP1
[    79.737] (II) fglrx(0): EDID for output DFP2
[    79.737] (II) fglrx(0): Cannot get EDID information for CRT1
[    79.737] (II) fglrx(0): EDID for output CRT1
[    79.737] (II) fglrx(0): Printing probed modes for output CRT1
[    79.737] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz UeP)
[    79.737] (II) fglrx(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz eP)
[    79.737] (II) fglrx(0): Modeline "1400x1050"x60.0  122.61  1400 1488 1640 1880  1050 1051 1054 1087 -hsync +vsync (65.2 kHz e)
[    79.737] (II) fglrx(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 +hsync +vsync (60.0 kHz e)
[    79.737] (II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    79.737] (II) fglrx(0): Modeline "1440x900"x60.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    79.737] (II) fglrx(0): Modeline "1280x960"x60.0  102.10  1280 1360 1496 1712  960 961 964 994 -hsync +vsync (59.6 kHz e)
[    79.737] (II) fglrx(0): Modeline "1366x768"x60.0   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz e)
[    79.737] (II) fglrx(0): Modeline "1360x768"x60.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz e)
[    79.737] (II) fglrx(0): Modeline "1280x800"x60.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[    79.737] (II) fglrx(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz e)
[    79.737] (II) fglrx(0): Modeline "1280x768"x60.0   79.50  1280 1344 1472 1664  768 771 778 798 -hsync +vsync (47.8 kHz e)
[    79.737] (II) fglrx(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    79.737] (II) fglrx(0): Modeline "1024x600"x60.0   48.96  1024 1064 1168 1312  600 601 604 622 -hsync +vsync (37.3 kHz e)
[    79.737] (II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    79.737] (II) fglrx(0): Modeline "800x480"x60.0   29.58  800 816 896 992  480 481 484 497 -hsync +vsync (29.8 kHz e)
[    79.737] (II) fglrx(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    79.737] (II) fglrx(0): Modeline "640x480"x60.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    79.737] (II) fglrx(0): Output DFP1 disconnected
[    79.737] (II) fglrx(0): Output DFP2 disconnected
[    79.737] (II) fglrx(0): Output CRT1 connected
[    79.737] (II) fglrx(0): Using user preference for initial modes
[    79.737] (II) fglrx(0): Output CRT1 using initial mode 1024x768
[    79.737] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    79.737] (II) fglrx(0): DPI set to (96, 96)
[    79.737] (II) fglrx(0): Eyefinity capable adapter detected.
[    79.737] (II) fglrx(0): Adapter AMD Radeon HD 8570D has 4 configurable heads and 1 displays connected.
[    79.737] (==) fglrx(0):  PseudoColor visuals disabled
[    79.737] (II) Loading sub module "ramdac"
[    79.737] (II) LoadModule: "ramdac"
[    79.737] (II) Module "ramdac" already built-in
[    79.737] (==) fglrx(0): NoDRI = NO
[    79.737] (==) fglrx(0): Capabilities: 0x00000000
[    79.737] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    79.737] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    79.737] (==) fglrx(0): UseFastTLS=0
[    79.737] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[    79.737] (--) Depth 24 pixmap format is 32 bpp
[    79.737] (II) fglrx(0): doing swlDriScreenInit
[    79.737] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    79.737] ukiDynamicMajor: found major device number 245
[    79.737] ukiDynamicMajor: found major device number 245
[    79.737] ukiDynamicMajor: found major device number 245
[    79.737] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[    79.737] ukiOpenDevice: node name is /dev/ati/card0
[    79.737] ukiOpenDevice: open result is 12, (OK)
[    79.737] ukiOpenByBusid: ukiOpenMinor returns 12
[    79.737] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[    79.737] (II) fglrx(0): [uki] DRM interface version 1.0
[    79.737] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:0:1:0"
[    79.737] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    79.737] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7fcc7c8bf000
[    79.737] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    79.737] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    79.738] (II) fglrx(0): swlDriScreenInit done
[    79.738] (II) fglrx(0): Kernel Module Version Information:
[    79.738] (II) fglrx(0):     Name: fglrx
[    79.738] (II) fglrx(0):     Version: 15.20.3
[    79.738] (II) fglrx(0):     Date: Sep  8 2015
[    79.738] (II) fglrx(0):     Desc: AMD FireGL DRM kernel module
[    79.738] (II) fglrx(0): Kernel Module version matches driver.
[    79.738] (II) fglrx(0): Kernel Module Build Time Information:
[    79.738] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        4.2.0-35-generic
[    79.738] (II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
[    79.738] (II) fglrx(0):     Build-Kernel __SMP__:            yes
[    79.738] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    79.738] (II) fglrx(0): [uki] register handle = 0x00004000
[    79.738] (II) fglrx(0): DRI initialization successfull
[    79.738] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01000000
[    79.738] (==) fglrx(0): Backing store enabled
[    79.738] (**) fglrx(0): DPMS enabled
[    79.738] (II) fglrx(0): Initialized in-driver Xinerama extension
[    79.738] (**) fglrx(0): Textured Video is enabled.
[    79.738] (II) LoadModule: "glesx"
[    79.738] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/glesx.so
[    79.741] (II) Module glesx: vendor="X.Org Foundation"
[    79.741]     compiled for 1.4.99.906, module version = 1.0.0
[    79.741] (II) fglrx(0): GLESX enableFlags = 8784
[    79.741] (II) fglrx(0): GLESX is enabled
[    79.741] (II) LoadModule: "amdxmm"
[    79.741] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/modules/amdxmm.so
[    79.741] (II) Module amdxmm: vendor="X.Org Foundation"
[    79.741]     compiled for 1.4.99.906, module version = 2.0.0
[    79.766] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): 
[    79.767] (II) fglrx(0): Enable composite support successfully
[    79.767] (WW) fglrx(0): Option "VendorName" is not used
[    79.767] (WW) fglrx(0): Option "ModelName" is not used
[    79.767] (WW) fglrx(0): Option "PreferredMode" is not used
[    79.768] (II) fglrx(0): X context handle = 0x1
[    79.768] (II) fglrx(0): [DRI] installation complete
[    79.768] (==) fglrx(0): Silken mouse enabled
[    79.768] (==) fglrx(0): Using HW cursor of display infrastructure!
[    79.768] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    79.958] (--) RandR disabled
[    79.965] ukiDynamicMajor: found major device number 245
[    79.965] ukiDynamicMajor: found major device number 245
[    79.965] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[    79.965] ukiOpenDevice: node name is /dev/ati/card0
[    79.965] ukiOpenDevice: open result is 13, (OK)
[    79.965] ukiOpenByBusid: ukiOpenMinor returns 13
[    79.965] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[    79.965] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[    79.965] (EE) AIGLX error: failed to open /usr/lib64/dri/fglrx_dri.so, error[/usr/lib64/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[    79.965] (EE) AIGLX error: failed to open /usr/X11R6/lib/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[    79.970] ukiDynamicMajor: found major device number 245
[    79.970] ukiDynamicMajor: found major device number 245
[    79.970] ukiDynamicMajor: found major device number 245
[    79.970] ukiOpenDevice: node name is /dev/ati/card0
[    79.970] ukiOpenDevice: open result is 14, (OK)
[    79.970] ukiGetBusid returned 'PCI:0:1:0'
[    79.970] ukiOpenDevice: node name is /dev/ati/card1
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: Open failed
[    79.971] ukiOpenDevice: node name is /dev/ati/card2
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: Open failed
[    79.971] ukiOpenDevice: node name is /dev/ati/card3
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: Open failed
[    79.971] ukiOpenDevice: node name is /dev/ati/card4
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: Open failed
[    79.971] ukiOpenDevice: node name is /dev/ati/card5
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: Open failed
[    79.971] ukiOpenDevice: node name is /dev/ati/card6
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: Open failed
[    79.971] ukiOpenDevice: node name is /dev/ati/card7
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: Open failed
[    79.971] ukiOpenDevice: node name is /dev/ati/card8
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: Open failed
[    79.971] ukiOpenDevice: node name is /dev/ati/card9
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: Open failed
[    79.971] ukiOpenDevice: node name is /dev/ati/card10
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: Open failed
[    79.971] ukiOpenDevice: node name is /dev/ati/card11
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: Open failed
[    79.971] ukiOpenDevice: node name is /dev/ati/card12
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: Open failed
[    79.971] ukiOpenDevice: node name is /dev/ati/card13
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: Open failed
[    79.971] ukiOpenDevice: node name is /dev/ati/card14
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: Open failed
[    79.971] ukiOpenDevice: node name is /dev/ati/card15
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: open result is -1, (No such device)
[    79.971] ukiOpenDevice: Open failed
[    79.971] ukiDynamicMajor: found major device number 245
[    79.971] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[    79.971] ukiOpenDevice: node name is /dev/ati/card0
[    79.971] ukiOpenDevice: open result is 14, (OK)
[    79.971] ukiOpenByBusid: ukiOpenMinor returns 14
[    79.971] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[    79.998] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[    79.999] ukiDynamicMajor: found major device number 245
[    79.999] ukiDynamicMajor: found major device number 245
[    79.999] ukiDynamicMajor: found major device number 245
[    79.999] ukiOpenDevice: node name is /dev/ati/card0
[    79.999] ukiOpenDevice: open result is 15, (OK)
[    79.999] ukiGetBusid returned 'PCI:0:1:0'
[    79.999] ukiOpenDevice: node name is /dev/ati/card1
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: Open failed
[    79.999] ukiOpenDevice: node name is /dev/ati/card2
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: Open failed
[    79.999] ukiOpenDevice: node name is /dev/ati/card3
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: Open failed
[    79.999] ukiOpenDevice: node name is /dev/ati/card4
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: Open failed
[    79.999] ukiOpenDevice: node name is /dev/ati/card5
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: Open failed
[    79.999] ukiOpenDevice: node name is /dev/ati/card6
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: Open failed
[    79.999] ukiOpenDevice: node name is /dev/ati/card7
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: Open failed
[    79.999] ukiOpenDevice: node name is /dev/ati/card8
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: Open failed
[    79.999] ukiOpenDevice: node name is /dev/ati/card9
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: Open failed
[    79.999] ukiOpenDevice: node name is /dev/ati/card10
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: Open failed
[    79.999] ukiOpenDevice: node name is /dev/ati/card11
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: Open failed
[    79.999] ukiOpenDevice: node name is /dev/ati/card12
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: Open failed
[    79.999] ukiOpenDevice: node name is /dev/ati/card13
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: Open failed
[    79.999] ukiOpenDevice: node name is /dev/ati/card14
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: Open failed
[    79.999] ukiOpenDevice: node name is /dev/ati/card15
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: open result is -1, (No such device)
[    79.999] ukiOpenDevice: Open failed
[    79.999] ukiDynamicMajor: found major device number 245
[    79.999] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[    79.999] ukiOpenDevice: node name is /dev/ati/card0
[    79.999] ukiOpenDevice: open result is 15, (OK)
[    79.999] ukiOpenByBusid: ukiOpenMinor returns 15
[    79.999] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[    80.012] (II) fglrx(0): Setting screen physical size to 270 x 203
[    80.021] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    80.023] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    80.024] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    80.024] (II) LoadModule: "evdev"
[    80.024] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    80.025] (II) Module evdev: vendor="X.Org Foundation"
[    80.025]     compiled for 1.17.2, module version = 2.9.2
[    80.025]     Module class: X.Org XInput Driver
[    80.025]     ABI class: X.Org XInput driver, version 21.0
[    80.025] (II) Using input driver 'evdev' for 'Power Button'
[    80.025] (**) Power Button: always reports core events
[    80.025] (**) evdev: Power Button: Device: "/dev/input/event1"
[    80.025] (--) evdev: Power Button: Vendor 0 Product 0x1
[    80.025] (--) evdev: Power Button: Found keys
[    80.025] (II) evdev: Power Button: Configuring as keyboard
[    80.025] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    80.025] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    80.025] (**) Option "xkb_rules" "evdev"
[    80.025] (**) Option "xkb_model" "pc105"
[    80.025] (**) Option "xkb_layout" "de"
[    80.027] (II) XKB: reuse xkmfile /var/lib/xkb/server-808BBA3D4C227BDB44C370226C34E44C5D69A4A9.xkm
[    80.027] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    80.027] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    80.027] (II) Using input driver 'evdev' for 'Power Button'
[    80.027] (**) Power Button: always reports core events
[    80.027] (**) evdev: Power Button: Device: "/dev/input/event0"
[    80.027] (--) evdev: Power Button: Vendor 0 Product 0x1
[    80.027] (--) evdev: Power Button: Found keys
[    80.027] (II) evdev: Power Button: Configuring as keyboard
[    80.027] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    80.028] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    80.028] (**) Option "xkb_rules" "evdev"
[    80.028] (**) Option "xkb_model" "pc105"
[    80.028] (**) Option "xkb_layout" "de"
[    80.028] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event4)
[    80.028] (II) No input driver specified, ignoring this device.
[    80.028] (II) This device may have been added with another device file.
[    80.028] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/event3)
[    80.028] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Applying InputClass "evdev pointer catchall"
[    80.028] (II) Using input driver 'evdev' for 'Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)'
[    80.028] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): always reports core events
[    80.028] (**) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Device: "/dev/input/event3"
[    80.084] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Vendor 0x45e Product 0x40
[    80.084] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found 3 mouse buttons
[    80.084] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found scroll wheel(s)
[    80.084] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found relative axes
[    80.084] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found x and y relative axes
[    80.084] (II) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Configuring as mouse
[    80.084] (II) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Adding scrollwheel support
[    80.084] (**) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): YAxisMapping: buttons 4 and 5
[    80.084] (**) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    80.084] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb9/9-3/9-3:1.0/0003:045E:0040.0001/input/input3/event3"
[    80.084] (II) XINPUT: Adding extended input device "Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)" (type: MOUSE, id 8)
[    80.084] (II) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): initialized for relative axes.
[    80.084] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) keeping acceleration scheme 1
[    80.084] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration profile 0
[    80.084] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000
[    80.084] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4
[    80.084] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/mouse0)
[    80.084] (II) No input driver specified, ignoring this device.
[    80.084] (II) This device may have been added with another device file.
[    80.085] (II) config/udev: Adding input device HD-Audio Generic Line Out CLFE (/dev/input/event10)
[    80.085] (II) No input driver specified, ignoring this device.
[    80.085] (II) This device may have been added with another device file.
[    80.085] (II) config/udev: Adding input device HD-Audio Generic Line Out Side (/dev/input/event11)
[    80.085] (II) No input driver specified, ignoring this device.
[    80.085] (II) This device may have been added with another device file.
[    80.085] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event12)
[    80.085] (II) No input driver specified, ignoring this device.
[    80.085] (II) This device may have been added with another device file.
[    80.085] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event5)
[    80.085] (II) No input driver specified, ignoring this device.
[    80.085] (II) This device may have been added with another device file.
[    80.085] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event6)
[    80.085] (II) No input driver specified, ignoring this device.
[    80.085] (II) This device may have been added with another device file.
[    80.086] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event7)
[    80.086] (II) No input driver specified, ignoring this device.
[    80.086] (II) This device may have been added with another device file.
[    80.086] (II) config/udev: Adding input device HD-Audio Generic Line Out Front (/dev/input/event8)
[    80.086] (II) No input driver specified, ignoring this device.
[    80.086] (II) This device may have been added with another device file.
[    80.086] (II) config/udev: Adding input device HD-Audio Generic Line Out Surround (/dev/input/event9)
[    80.086] (II) No input driver specified, ignoring this device.
[    80.086] (II) This device may have been added with another device file.
[    80.086] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[    80.086] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    80.086] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    80.086] (**) AT Translated Set 2 keyboard: always reports core events
[    80.086] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[    80.086] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    80.086] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    80.086] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    80.086] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[    80.086] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    80.086] (**) Option "xkb_rules" "evdev"
[    80.086] (**) Option "xkb_model" "pc105"
[    80.086] (**) Option "xkb_layout" "de"
[    80.137] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[  1109.200] (II) AIGLX: Suspending AIGLX clients for VT switch
[  1109.200] (II) fglrx(0): Backup framebuffer data.
[  1109.212] (II) fglrx(0): Backup complete.
[ 84269.414] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 84269.693] (II) fglrx(0): Cannot get EDID information for CRT1
[ 84968.236] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 84968.237] (II) fglrx(0): Backup framebuffer data.
[ 84968.254] (II) fglrx(0): Backup complete.
 
Ok, sieht doch erstmal gar nicht so schlecht aus. Habe unter Debian die selben Treiberversion.
Die Fehler bekomme ich zwar nicht
(EE) fglrx(0): Cannot read int vect
(WW) fglrx(0): GetVBEMode failed
Aber all zu tragisch scheint das nicht zu sein? Ein Monitor ist angeschlossen; wird die grafische Oberfläche auch genutzt?
Wenn ja, in einem VTerm würde ich als angemeldeter Benutzer mal ein xhost + absetzen und erneut clinfo abrufen. Wenn dann der zusätzliche GPU Teil ausgespuckt wird, dann ist es dieses Rechteproblem.
Boinc neu starten und auch dieser müsste nun die GPU erkennen. Das müsste man jedes mal nach Start machen (xhost & Boinc neustarten) oder als Konfig Option eines schlauen Login Managers einbauen oder diese Zeile hier in die systemweite /etc/bash.bashrc ans Ende setzen:
case "$COMPUTE" in '') export COMPUTE=:0;; *) echo -e "\033[1;31mYour COMPUTE is set. To use the local GPU export COMPUTE=:0\033[0m" ;; esac
 
Hm, ok es ist zwar ein Bildschirm dran, aber nicht zum Arbeiten, nur als Konsole für Notfälle, weil das ein NAS Server ist.
Ich komm da auch so jetzt nicht dran, sondern nur per ssh.
Ich werde das xhost + aber abends mal probieren

Danke für Deine Bemühungen cyrusNGC_224!
 
Hab mir gestern eine frische Testinstallation mit dem fglrx abgeschossen bis mir die Idee kam das es an der noch zusätzlich aktivierten Intel iGP liegen könnte, im UEFI abgeschaltet ist zu mindest der X-Server wieder gestartet. Heute Abend erfolgt dann lieber der 2. Versuch mit ausgeschalteter iGP.
 
cyrusNGC_224: "xhost +" direkt am Schirm hat es gebracht. Nun wird die GPU erkannt! Wettcrunch kann kommen.
Blöd aber wenn man nur per ssh drauf kann....
 
@Onkel/Cyrus

Das war der aktuelle von der AMD Seite für Ubuntu.
 
Nach abschalten der IGP einen I3 4130 zusammen mit einer HD7850 mit der Ubuntu 15.10 Variante erfolgreich für den Pentathlon an den Start gebracht. Das ist auch die Variante die einfacher ist und die Software ist dazu aktueller.
 
cyrusNGC_224: "xhost +" direkt am Schirm hat es gebracht. Nun wird die GPU erkannt! Wettcrunch kann kommen.
Blöd aber wenn man nur per ssh drauf kann....
Auch mal das setzen der COMPUTE Variable probiert?
Also wenn der eh headless laufen soll, dann kannste auch xdm installieren, der automatisch beim Boot mit gestartet wird. In der /etc/X11/xdm/xdm-config muss "DisplayManager*authorize: true" auf false geändert werden, was also dasselbe wie "xhost +" bewirkt.

@Raspo: Da müsste man genauer forschen, warum das so ist. Also installieren sollte sich der fglrx auf jeden Fall lassen, auch wenn gar keine AMD GPU verbaut ist. Und dann müsste dieser unbedingt auch die GPU erkennen, wenn die xorg.conf den auch drin stehen hat. Eventuelle Probleme lassen sich dann im Xorg Log aus machen.
 
Achtung, wegen flgrx/OpenCL nicht von Upbuntu 14.04/1510 auf 16.04 upgraden im Moment:

users relying on pro/workstation class features (latest OpenGL, OpenCL, ..) probably should stay on a supported release until the hybrid stack is available
 
Zuletzt bearbeitet:
Kann mit get dist-upgrade auf 16.04 upgraden? Oder ist das nur für Unterversionen zuständig?
 
Denke nicht:

Upgrading from Ubuntu 14.04 LTS or 15.10

To upgrade on a desktop system:

Open the "Software & Updates" Setting in System Settings.
Select the 3rd Tab called "Updates".
Set the "Notify me of a new Ubuntu version" dropdown menu to "For any new version" if you are using 15.10, set it to "long-term support versions" if you are using 14.04 LTS.
Press Alt+F2 and type in "update-manager" (without the quotes) into the command box.
Software Updater should open up and tell you: New distribution release '16.04 LTS' is available.
Click Upgrade and follow the on-screen instructions.

To upgrade on a server system:

Install the update-manager-core package if it is not already installed.
Make sure the /etc/update-manager/release-upgrades is set to normal if you are using 15.10, lts if you are using 14.04 LTS.

Launch the upgrade tool with the command sudo do-release-upgrade.
Follow the on-screen instructions.

Note that the server upgrade will use GNU screen and automatically re-attach in case of dropped connection problems.

There are no offline upgrade options for Ubuntu Desktop and Ubuntu Server. Please ensure you have network connectivity to one of the official mirrors or to a locally accessible mirror and follow the instructions above.
 
Ich habe zwar weder Mint, noch ubuntu, sondern openSUSE Leap 42.1, aber vielleicht hat trotzdem jemand ne Idee, warum die Pitcairn ignoriert wird?!

Sa 23 Apr 2016 12:50:27 CEST | | OpenCL: AMD/ATI GPU 0 (ignored by config): Pitcairn (driver version 1912.5 (VM), device version OpenCL 1.2 AMD-APP (1912.5), 769MB, 769MB available, 1152 GFLOPS peak)

Ist neben ner Capeverde die zweite GPU im System. Die Capeverde wird erkannt und rechnet.

Gruß,
Ritschie
 
"ignored by config"
Da schau mal rein. <use_all_gpus>1</use_all_gpus> steht drinnen?
 
No usable GPUs found :(
Ich habe Linux Mint 17 installiert, Boinc und das AMD-SDK, aber bis jetzt trotz der verschiedenen Anleitungen hier kein Glück mit der Ati-GPU

clinfo
Number of platforms: 1
Platform Profile: FULL_PROFILE
Platform Version: OpenCL 2.0 AMD-APP (1800.11)
Platform Name: AMD Accelerated Parallel Processing
Platform Vendor: Advanced Micro Devices, Inc.
Platform Extensions: cl_khr_icd cl_amd_event_callback cl_amd_offline_devices


Platform Name: AMD Accelerated Parallel Processing
Number of devices: 2
Device Type: CL_DEVICE_TYPE_GPU
Vendor ID: 1002h
Board name: AMD Radeon R7 200 Series
Device Topology: PCI[ B#1, D#0, F#0 ]
Max compute units: 14
Max work items dimensions: 3
Max work items[0]: 256
Max work items[1]: 256
Max work items[2]: 256
Max work group size: 256
Preferred vector width char: 4
Preferred vector width short: 2
Preferred vector width int: 1
Preferred vector width long: 1
Preferred vector width float: 1
Preferred vector width double: 1
Native vector width char: 4
Native vector width short: 2
Native vector width int: 1
Native vector width long: 1
Native vector width float: 1
Native vector width double: 1
Max clock frequency: 1075Mhz
Address bits: 64
Max memory allocation: 1340080128
Image support: Yes
Max number of images read arguments: 128
Max number of images write arguments: 64
Max image 2D width: 16384
Max image 2D height: 16384
Max image 3D width: 2048
Max image 3D height: 2048
Max image 3D depth: 2048
Max samplers within kernel: 16
Max size of kernel argument: 1024
Alignment (bits) of base address: 2048
Minimum alignment (bytes) for any datatype: 128
Single precision floating point capability
Denorms: No
Quiet NaNs: Yes
Round to nearest even: Yes
Round to zero: Yes
Round to +ve and infinity: Yes
IEEE754-2008 fused multiply-add: Yes
Cache type: Read/Write
Cache line size: 64
Cache size: 16384
Global memory size: 1920991232
Constant buffer size: 65536
Max number of constant args: 8
Local memory type: Scratchpad
Local memory size: 32768
Max pipe arguments: 16
Max pipe active reservations: 16
Max pipe packet size: 1340080128
Max global variable size: 1206072064
Max global variable preferred total size: 1920991232
Max read/write image args: 64
Max on device events: 1024
Queue on device max size: 524288
Max on device queues: 1
Queue on device preferred size: 262144
SVM capabilities:
Coarse grain buffer: Yes
Fine grain buffer: Yes
Fine grain system: No
Atomics: No
Preferred platform atomic alignment: 0
Preferred global atomic alignment: 0
Preferred local atomic alignment: 0
Kernel Preferred work group size multiple: 64
Error correction support: 0
Unified memory for Host and Device: 0
Profiling timer resolution: 1
Device endianess: Little
Available: Yes
Compiler available: Yes
Execution capabilities:
Execute OpenCL kernels: Yes
Execute native function: No
Queue on Host properties:
Out-of-Order: No
Profiling : Yes
Queue on Device properties:
Out-of-Order: Yes
Profiling : Yes
Platform ID: 0x7f3fb98dc430
Name: Bonaire
Vendor: Advanced Micro Devices, Inc.
Device OpenCL C version: OpenCL C 2.0
Driver version: 1800.11 (VM)
Profile: FULL_PROFILE
Version: OpenCL 2.0 AMD-APP (1800.11)
Extensions: cl_khr_fp64 cl_amd_fp64 cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics cl_khr_local_int32_extended_atomics cl_khr_int64_base_atomics cl_khr_int64_extended_atomics cl_khr_3d_image_writes cl_khr_byte_addressable_store cl_khr_gl_sharing cl_khr_gl_depth_images cl_ext_atomic_counters_32 cl_amd_device_attribute_query cl_amd_vec3 cl_amd_printf cl_amd_media_ops cl_amd_media_ops2 cl_amd_popcnt cl_khr_image2d_from_buffer cl_khr_spir cl_khr_subgroups cl_khr_gl_event cl_khr_depth_images


Device Type: CL_DEVICE_TYPE_CPU
Vendor ID: 1002h
Board name:
Max compute units: 8
Max work items dimensions: 3
Max work items[0]: 1024
Max work items[1]: 1024
Max work items[2]: 1024
Max work group size: 1024
Preferred vector width char: 16
Preferred vector width short: 8
Preferred vector width int: 4
Preferred vector width long: 2
Preferred vector width float: 8
Preferred vector width double: 4
Native vector width char: 16
Native vector width short: 8
Native vector width int: 4
Native vector width long: 2
Native vector width float: 8
Native vector width double: 4
Max clock frequency: 1695Mhz
Address bits: 64
Max memory allocation: 4192246784
Image support: Yes
Max number of images read arguments: 128
Max number of images write arguments: 64
Max image 2D width: 8192
Max image 2D height: 8192
Max image 3D width: 2048
Max image 3D height: 2048
Max image 3D depth: 2048
Max samplers within kernel: 16
Max size of kernel argument: 4096
Alignment (bits) of base address: 1024
Minimum alignment (bytes) for any datatype: 128
Single precision floating point capability
Denorms: Yes
Quiet NaNs: Yes
Round to nearest even: Yes
Round to zero: Yes
Round to +ve and infinity: Yes
IEEE754-2008 fused multiply-add: Yes
Cache type: Read/Write
Cache line size: 64
Cache size: 32768
Global memory size: 16768987136
Constant buffer size: 65536
Max number of constant args: 8
Local memory type: Global
Local memory size: 32768
Max pipe arguments: 16
Max pipe active reservations: 16
Max pipe packet size: 4192246784
Max global variable size: 1879048192
Max global variable preferred total size: 1879048192
Max read/write image args: 64
Max on device events: 0
Queue on device max size: 0
Max on device queues: 0
Queue on device preferred size: 0
SVM capabilities:
Coarse grain buffer: No
Fine grain buffer: No
Fine grain system: No
Atomics: No
Preferred platform atomic alignment: 0
Preferred global atomic alignment: 0
Preferred local atomic alignment: 0
Kernel Preferred work group size multiple: 1
Error correction support: 0
Unified memory for Host and Device: 1
Profiling timer resolution: 1
Device endianess: Little
Available: Yes
Compiler available: Yes
Execution capabilities:
Execute OpenCL kernels: Yes
Execute native function: Yes
Queue on Host properties:
Out-of-Order: No
Profiling : Yes
Queue on Device properties:
Out-of-Order: No
Profiling : No
Platform ID: 0x7f3fb98dc430
Name: Intel(R) Xeon(R) CPU E3-1230 V2 @ 3.30GHz
Vendor: GenuineIntel
Device OpenCL C version: OpenCL C 1.2
Driver version: 1800.11 (sse2,avx)
Profile: FULL_PROFILE
Version: OpenCL 1.2 AMD-APP (1800.11)
Extensions: cl_khr_fp64 cl_amd_fp64 cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics cl_khr_local_int32_extended_atomics cl_khr_int64_base_atomics cl_khr_int64_extended_atomics cl_khr_3d_image_writes cl_khr_byte_addressable_store cl_khr_gl_sharing cl_ext_device_fission cl_amd_device_attribute_query cl_amd_vec3 cl_amd_printf cl_amd_media_ops cl_amd_media_ops2 cl_amd_popcnt cl_khr_spir cl_khr_gl_event

Edit: Nach Installation von Ubuntu 15.10 scheint es zu funktionieren. Allerdings ist die Benutzeroberfläche von Ubuntu extrem gewöhnungsbedürftig :-/
 
Zuletzt bearbeitet:
Dann installieren einfach eine andere Oberfläche. Mate, Cinnamon, GNOME, KDE, XFCE .... Da gibts für jeden Geschmack das passende ;)
 
Dann installieren einfach eine andere Oberfläche. Mate, Cinnamon, GNOME, KDE, XFCE .... Da gibts für jeden Geschmack das passende ;)

Liegt vielleicht an mir, aber nachdem ich mir einen anderen Desktop installiert hatte startete Ubuntu nicht mehr. Ich habe jetzt gleich das Lubuntu-Spin verwendet und versuche mich die nächsten Wochen damit zu arrangieren. Wenn nächstes Jahr die freien Treiber kein Boinc können bleibt die GPU halt aus :-(
 
Vermutlich hast du auch gleich einen neuen Fenstermanager mitinstalliert, der nicht ordentlich konfiguriert wurde bzw. nicht startet. Das könntest du mittels Konsole manuell machen, aber eigentlich hättest du bei der Installation der anderen Oberfläche die Frage nach dem Standardfenstermanager auf LightDM wählen müssen.
 
Starten sollte der eigentlich immer. So ein Anmeldemanager und Desktop überhaupt ist doch nur Zusatz.
 
Gestern habe ich 3x 5350 das Mint Linux per sudo aktualisiert, dannach findet Boinc keine Grafikkarte.
Ich hatte Collatz auf Allen 3 rechnern laufen.
Auch ein restart des Boinc clienten per console brachte keine Abhilfe.

Was ist da passiert, vor dem Update lief alles wunderbar?
Bzw. was muss ich machen?
 
Zurück
Oben Unten