Linux Mint 20.3 “Una” mit Cinnamon, Xfce und Mate verfügbar.

eratte

Redaktion
☆☆☆☆☆☆
Mitglied seit
11.11.2001
Beiträge
21.751
Renomée
2.777
Standort
Rheinberg / NRW
  • BOINC Pentathlon 2012
  • BOINC Pentathlon 2013
  • BOINC Pentathlon 2014
  • BOINC Pentathlon 2015
  • BOINC Pentathlon 2016
  • BOINC Pentathlon 2017
  • BOINC Pentathlon 2020
  • SETI@Home Intel-Race II
  • BOINC Pentathlon 2021
Linux Mint Homepage


Linux Mint 20.3 “Una”:

Download Linux Mint 20.3 "Una"
How to upgrade to Linux Mint 20.3

Linux Mint 20.3 “Una” Cinnamon released!

thumb_cinnamon.png


Linux Mint 20.3 “Una” Xfce released!

thumb_xfce.png


Linux Mint 20.3 “Una” MATE released!

thumb_mate.png


Linux Mint 20.2 “Uma”:

Download Linux Mint 20.2 Uma
How to upgrade to Linux Mint 20.2

Linux Mint 20.2 “Uma” Cinnamon released!
Linux Mint 20.2 “Uma” MATE released!
Linux Mint 20.2 “Uma” Xfce released!

Linux Mint 20.1 “Ulyssa”:

Download Linux Mint 20.1 Ulyssa
How to upgrade to Linux Mint 20.1

Linux Mint 20.1 “Ulyssa” Cinnamon released!
Linux Mint 20.1 “Ulyssa” MATE released!
Linux Mint 20.1 “Ulyssa” Xfce released!

Linux Mint 20 "Ulyana":

Download Linux Mint 20 Ulyana
Release Notes for Linux Mint 20
Documentation
How to upgrade to Linux Mint 20

Linux Mint 20 “Ulyana” Cinnamon released!
Linux Mint 20 “Ulyana” MATE released!
Linux Mint 20 “Ulyana” Xfce released!

Vorgängerversionen:
Linux Mint 19.3 “Tricia” mit Cinnamon, Mate, Xfce verfügbar.
Linux Mint 18.3 mit Cinnamon, Mate, Xfce und KDE ist fertig!
Linux Mint 17.3 ist fertig.
 
Zuletzt bearbeitet:
Ich habe es mal kurz in einer VirtualBox VM installiert, beim rumspielen alles ok - aber das hat keine Aussagekraft.
 
Zuletzt bearbeitet:
Mint ist für mich der Inbegriff geworden zum installieren und es funktioniert.

Terminal brauch ich nur sehr wenig, meist wegen Treiber.


Heute habe ich nur noch einen USB Stick mit windows da ich ab und zu mal SFDL & WinSCP brauche, Filezilla ist Müll *buck*
 
Auf meinem Athlon 200GE hat's nicht geklappt -> nur noch Konsole, kein Mate mehr... :(

Vorher aber einen Stick erstellt -> muss ich eben neu installieren wenn es mit dem Upgrade nicht hinhaut... Timeshift war auch aktiv, zur Not geht's wieder zurück zur 19.3.

Grüße, Martin
 
Auf einem E7222 Notebook (i5 3320m, iHD4000) Testsystem lief alles bestens, obwohl es den umständlichen Weg von Mint 18.3 (Cinnamon und Kernel 4.15) über 19 und 19.3 zur aktuellen Version ging.

Auffällig fand ich, das das CPU Microcodeupdate nicht mehr in der Treiberverwaltung gelistet wird.
Der aktuelle spectre-meltdown-checker liefert sowohl bei 18.3 als auch beim frischen Upgrade auf Mint 20 mit forciertem Kernel 5.4 ein erfreulich gutes Patchlevel für die Ivy Bridge CPUs.

Ob das hoffentlich bald gelieferte Notebook mit Renoir APU Manjaro Cinnamon Edition oder Mint 20 mit Cinnamon bekommt habe ich noch nicht entschieden.
 
Läuft jetzt problemlos auf meinem 200GE. Eine EFI-Partition musste noch her, dann hat's dem Installer gefallen.

Grüße, Martin
 
Linux Mint 20 Cinnamon bricht kurz vor Schluss mit der Fehlermaldung ab: Grub konnte nicht istalliert werden, habe es auf 2 SSD´s versucht, der gleiche Fehler.

System :

Asrock AB450m HDV Ver. 4

Amd 2200

Sandisk SSD 64 GB bzw. Crucial C300 128 GB

Habe es versucht mit: "sudo add-opt-repository ppa:yannubuntu/boot-repair" zu fixen leider bringt es keinen erfolg.
 
SSDs mal gewipet vorher?
 
Linux Mint 20 Cinnamon bricht kurz vor Schluss mit der Fehlermaldung ab: Grub konnte nicht istalliert werden
Was ich vermute:

Es fehlt die EFI-Partition mit 100 MB?
Es muss eine primäre Partition sein!

Grüße, Martin
 
Foren Links gefixed.
 
Ich bleibe noch immer lieber bei Mate... Aber eventuell beim nächsten Upgrade mal wieder Cinnamon eine Chance geben?

Grüße, Martin
 
Auf der einen Art kann ich es verstehen, auf der anderen Art kotzt es mich an das der 32Bit Support weg ist und es nur noch 64Bit Systeme gibt.
Gerade für ältere Systeme habe ich gerne ein 32Bit Linux genommen. Also so Systeme wo 4GB verbaut sind und die igp genutzt wird.
Alleine der Linux Treiber wegen exoticher Hardware war fast immer auf 32Bit programmiert
 
Monthly News – December 2020

Dauert wohl noch etwas aber denke das ist so richtig wie er das sieht:

The release comes out when we’re happy with it. Looking at the list of bugs we have, there still are issues we want to fix. In 2 months time it won’t matter at all whether we released this a week earlier or a week later, but the bugs we let through, especially those which affect the live session, will mark the release forever and be on the forefront of the version people download for the next 6 months.

So we do not have set release dates. We do however have a 6 months release cycle which gives us rhythm and a sense of urgency and getting this release out right now is all we’re focused on.

News diesmal auch für die Homepage habe ich schon fertig ;)
 
Zuletzt bearbeitet:
Zurück
Oben Unten