X11 und Ati fglrx Treiber

ghostadmin

ghostadmin

Grand Admiral Special
Mitglied seit
11.11.2001
Beiträge
25.209
Renomée
189
Standort
Dahoam Studios
Wer hat sowas schonmal konfiguriert?

So wirklich glücklich bin ich damit noch nicht. Es ist eine Radeon 9800 und ich habe
fglrx_6_8_0-8.19.10-1.i386.rpm installiert. Es sind 2 analoge Bildschirme angeschlossen. Desktopmanager ist Gnome.

Wenn der Treiber fglrx aktiv ist in der xorg.conf, dann sind Videos sehr langsam. Mit Mplayer oder Kaffeine kann ich gar keine öffnen nur mit Xine

Im Gnome sehe ich ein ATI Control Applet aber wenn man da was einstellt dann ändert sich nichts

meine xorg.conf

Code: 
Section "Files"
  FontPath     "/usr/X11R6/lib/X11/fonts/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/local"
  FontPath     "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
  FontPath     "/usr/X11R6/lib/X11/fonts/URW"
  FontPath     "/usr/X11R6/lib/X11/fonts/Speedo"
  FontPath     "/usr/X11R6/lib/X11/fonts/PEX"
  FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/Type1"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/kwintv"
  FontPath     "/usr/X11R6/lib/X11/fonts/truetype"
  FontPath     "/usr/X11R6/lib/X11/fonts/uni:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/CID"
  FontPath     "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/Type1"
  FontPath     "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/xtest"
  FontPath     "/opt/kde3/share/fonts"
  InputDevices "/dev/ttyS0"
  InputDevices "/dev/ttyS1"
  InputDevices "/dev/ttyS2"
  InputDevices "/dev/ttyS3"
  InputDevices "/dev/ttyS4"
  InputDevices "/dev/ttyS5"
  InputDevices "/dev/ttyS6"
  InputDevices "/dev/ttyS7"
  InputDevices "/dev/ttyS8"
  InputDevices "/dev/psaux"
  InputDevices "/dev/logibm"
  InputDevices "/dev/sunmouse"
  InputDevices "/dev/atibm"
  InputDevices "/dev/amigamouse"
  InputDevices "/dev/atarimouse"
  InputDevices "/dev/inportbm"
  InputDevices "/dev/gpmdata"
  InputDevices "/dev/mouse"
  InputDevices "/dev/usbmouse"
  InputDevices "/dev/adbmouse"
  InputDevices "/dev/input/mice"
  InputDevices "/dev/input/event0"
  InputDevices "/dev/pointer0"
  InputDevices "/dev/pointer1"
  InputDevices "/dev/pointer2"
  InputDevices "/dev/pointer3"
EndSection

Section "ServerFlags"
  Option       "AllowMouseOpenFail"
EndSection

Section "Module"
  Load         "type1"
  Load         "dbe"
  Load         "freetype"
  Load         "glx"
  Load         "v4l"
  Load         "extmod"
EndSection

Section "InputDevice"
  Driver       "kbd"
  Identifier   "Keyboard[0]"
  Option       "Protocol" "Standard"
  Option       "XkbLayout" "de"
  Option       "XkbModel" "pc105"
  Option       "XkbRules" "xfree86"
  Option       "XkbVariant" "nodeadkeys"
EndSection

Section "InputDevice"
  Driver       "mouse"
  Identifier   "Mouse[1]"
  Option       "Buttons" "7"
  Option       "Device" "/dev/input/mice"
  Option       "Name" "ImExPS/2 Logitech Explorer Mouse"
  Option       "Protocol" "explorerps/2"
  Option       "Vendor" "Sysp"
  Option       "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
  DisplaySize  300 230
  HorizSync    28-102
  Identifier   "Monitor[0]"
  ModelName    "VISION MASTER 450"
  Option       "DPMS"
  VendorName   "IIYAMA"
  VertRefresh  50-90
  UseModes     "Modes[0]"
EndSection

Section "Modes"
  Identifier   "Modes[0]"
  Modeline 	"1152x864" 125.43 1152 1232 1360 1568 864 865 868 909
  Modeline 	"1024x768" 97.84 1024 1088 1200 1376 768 769 772 808
  Modeline 	"1024x768" 86.18 1024 1088 1200 1376 768 769 772 803
  Modeline 	"1024x768" 73.89 1024 1080 1192 1360 768 769 772 799
  Modeline 	"1024x768" 61.89 1024 1080 1184 1344 768 769 772 794
  Modeline 	"800x600" 58.73 800 840 928 1056 600 601 604 632
  Modeline 	"800x600" 51.73 800 840 928 1056 600 601 604 628
  Modeline 	"800x600" 44.13 800 840 920 1040 600 601 604 624
  Modeline 	"800x600" 36.88 800 832 912 1024 600 601 604 621
  Modeline 	"768x576" 53.75 768 808 888 1008 576 577 580 606
  Modeline 	"768x576" 47.41 768 808 888 1008 576 577 580 603
  Modeline 	"768x576" 40.41 768 800 880 992 576 577 580 599
  Modeline 	"768x576" 33.74 768 792 872 976 576 577 580 596
  Modeline 	"640x480" 36.97 640 672 736 832 480 481 484 505
  Modeline 	"640x480" 32.64 640 672 736 832 480 481 484 503
  Modeline 	"640x480" 27.74 640 664 728 816 480 481 484 500
  Modeline 	"640x480" 23.06 640 656 720 800 480 481 484 497
  Modeline 	"800x600" 40.00 800 840 968 1056 600 601 605 628 +HSync +VSync
EndSection

Section "Screen"
  DefaultDepth 24
  SubSection "Display"
    Depth      15
    Modes      "1152x864" "1024x768" "800x600" "768x576" "640x480" 
  EndSubSection
  SubSection "Display"
    Depth      16
    Modes      "1152x864" "1024x768" "800x600" "768x576" "640x480" 
  EndSubSection
  SubSection "Display"
    Depth      24
    Modes      "1152x864" "1024x768" "800x600" "768x576" "640x480" 
  EndSubSection
  SubSection "Display"
    Depth      32
    Modes      "1152x864" "1024x768" "800x600" "768x576" "640x480" 
  EndSubSection
  SubSection "Display"
    Depth      8
    Modes      "1152x864" "1024x768" "800x600" "768x576" "640x480" 
  EndSubSection
  Device       "Device[0]"
  Identifier   "Screen[0]"
  Monitor      "Monitor[0]"
EndSection

Section "Device"
  BoardName    "R350 NH"
  BusID        "1:0:0"
  Driver       "fglrx"
  Identifier   "Device[0]"
  VendorName   "ATI"
EndSection

Section "ServerLayout"
  Identifier   "Layout[all]"
  InputDevice  "Keyboard[0]" "CoreKeyboard"
  InputDevice  "Mouse[1]" "CorePointer"
  Option       "Clone" "on"
  Option       "Xinerama" "on"
  Screen       "Screen[0]"
EndSection

Section "DRI"
    Group      "video"
    Mode       0660
EndSection

Section "Extensions"
EndSection

Wer kann mir da mal helfen?
 
es gibt da ein Programm ähnlich xf86config namens fglrxconfig aber so toll ist das auch nicht

hab ein bißchen im Netz gesucht und das jetzt einigermaßen hinbekommen, allerdings was noch nicht schlecht wäre wenn man Videos öffnet das die am 2 Schirm automatisch in Vollbild abgespielt werden so wie das unter Windows geht

Code: 
# File: xorg.conf
# File generated by fglrxconfig (C) ATI Technologies, a substitute for xf86config.

# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# 
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# 
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# 
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of 
# this file.
# **********************************************************************

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
    Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
#    Group 100    # users
#    Mode 0660
EndSection

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"  	# Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    Load	"extmod"
    SubSection  "extmod"
#      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the Type1 and FreeType font modules
    Load        "type1"
    Load        "freetype"

# This loads the GLX module
    Load        "glx"   # libglx.a
    Load        "dri"   # libdri.a

Load	"v4l"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# 
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
# 

  FontPath     "/usr/X11R6/lib/X11/fonts/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/local"
  FontPath     "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
  FontPath     "/usr/X11R6/lib/X11/fonts/URW"
  FontPath     "/usr/X11R6/lib/X11/fonts/Speedo"
  FontPath     "/usr/X11R6/lib/X11/fonts/PEX"
  FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/Type1"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/kwintv"
  FontPath     "/usr/X11R6/lib/X11/fonts/truetype"
  FontPath     "/usr/X11R6/lib/X11/fonts/uni:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/CID"
  FontPath     "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/Type1"
  FontPath     "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/xtest"
  FontPath     "/opt/kde3/share/fonts"
  InputDevices "/dev/ttyS0"
  InputDevices "/dev/ttyS1"
  InputDevices "/dev/ttyS2"
  InputDevices "/dev/ttyS3"
  InputDevices "/dev/ttyS4"
  InputDevices "/dev/ttyS5"
  InputDevices "/dev/ttyS6"
  InputDevices "/dev/ttyS7"
  InputDevices "/dev/ttyS8"
  InputDevices "/dev/psaux"
  InputDevices "/dev/logibm"
  InputDevices "/dev/sunmouse"
  InputDevices "/dev/atibm"
  InputDevices "/dev/amigamouse"
  InputDevices "/dev/atarimouse"
  InputDevices "/dev/inportbm"
  InputDevices "/dev/gpmdata"
  InputDevices "/dev/mouse"
  InputDevices "/dev/usbmouse"
  InputDevices "/dev/adbmouse"
  InputDevices "/dev/input/mice"
  InputDevices "/dev/input/event0"
  InputDevices "/dev/pointer0"
  InputDevices "/dev/pointer1"
  InputDevices "/dev/pointer2"
  InputDevices "/dev/pointer3"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client. 

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings. 

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier	"Keyboard1"
    Driver	"kbd"
    Option "AutoRepeat" "500 30"
    Option "XkbRules"	"xfree86"
    Option "XkbModel"	"pc105"
    Option "XkbLayout"	"de"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier	"Mouse1"
    Driver "mouse"
    Option "Protocol"   "ImPS/2"
    Option "ZAxisMapping"   "4 5"
    Option "Device"     "/dev/input/mice"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.


# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection




# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier  "Monitor0"
    HorizSync   31.5-98
    VertRefresh 60 - 100
    Option "DPMS"

EndSection


Section "Monitor"
    Identifier  "Monitor1"
    HorizSync   31.5-98
    VertRefresh 60 - 100
    Option "DPMS"

EndSection


### Graphics Device / Chipset Configuration

# NOTE: I am not doing complete documentation of these features, Google is your friend
Section "Device"
    Identifier                          "ATI Graphics Adapter NOT Dual Head"
    Driver                              "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
# === misc DRI settings ===
    Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===

# Monitor modes
#
# NOTE: for a better description of these modes go to http://www.ati.com/support/infobase/4485.html
#
# Single: 	only the LCD is activated even if external connected
# Clone: 	both screens always on with same content
# Laptop:	switches between LCD and external monitor
# Big Desktop:	one logical desktop stretched across both monitors
# Dual Head:	two separate desktops, no D&D between screens, can run different window managers
#
# NOTE: IF DUAL HEAD MODE, MAKE SURE TO UNCOMMENT APPROPRIATE LINES IN ServerLayout section
#
#    Option "DesktopSetup"               "0x00000000"	# Single -or- Dual Head
#    Option "DesktopSetup"               "0x00000100"	# Clone -or- Laptop (configure MonitorLayout below)
    Option "DesktopSetup"               "0x00000200"	# Big - Horizontal
#    Option "DesktopSetup"               "0x00000201"	# Big - Horizontal, connector1 on right
#    Option "DesktopSetup"               "0x00000300"	# Big - Vertical
#    Option "DesktopSetup"               "0x00000301"	# Big - Vertical, connector1 on bottom

# OPTIONS FOR CLONE/LAPTOP MODES
#    Option "MonitorLayout"              "LVDS, CRT"	# ... explicitely configure monitors for Clone mode
    Option "MonitorLayout"              "AUTO, AUTO"	# ... use this to choose Clone mode with auto detection
#    Option "MonitorLayout"              "AUTO, NONE"	# ... use this to choose Laptop mode with autodetection

    Option "IgnoreEDID"                 "off"
    Option "HSync2"                     "30-82" 
    Option "VRefresh2"                  "50-120" 
    Option "ScreenOverlap"              "0" 
# === TV-out Management ===
    Option "NoTV"                       "yes"     
    Option "TVStandard"                 "PAL-D"     
    Option "TVHSizeAdj"                 "0"     
    Option "TVVSizeAdj"                 "0"     
    Option "TVHPosAdj"                  "0"     
    Option "TVVPosAdj"                  "0"     
    Option "TVHStartAdj"                "0"     
    Option "TVColorAdj"                 "0"     
    Option "GammaCorrectionI"           "0x06419064"
    Option "GammaCorrectionII"          "0x06419064"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000000"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"         "off"
# === QBS Management ===
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
# === FSAA Management ===
    Option "FSAAEnable"                 "yes"
    Option "FSAAScale"                  "2"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
    Option "UseFastTLS"                 "0"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "yes"
    Option "ForceGenericCPU"            "no"
    BusID "PCI:1:0:0"    # vendor=1002, device=4c66
    Screen 0
EndSection


Section "Device"
    Identifier                          "ATI Graphics Adapter Dual Head 0"
    Driver                              "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
# === misc DRI settings ===
    Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
    Option "DesktopSetup"               "0x00000000" 
    Option "MonitorLayout"              "AUTO, AUTO"
    Option "IgnoreEDID"                 "off"
    Option "HSync2"                     "28.0 - 95.0" 
    Option "VRefresh2"                  "60 - 100" 
    Option "ScreenOverlap"              "0" 
# === TV-out Management ===
    Option "NoTV"                       "yes"     
    Option "TVStandard"                 "PAL-D"     
    Option "TVHSizeAdj"                 "0"     
    Option "TVVSizeAdj"                 "0"     
    Option "TVHPosAdj"                  "0"     
    Option "TVVPosAdj"                  "0"     
    Option "TVHStartAdj"                "0"     
    Option "TVColorAdj"                 "0"     
    Option "GammaCorrectionI"           "0x00000000"
    Option "GammaCorrectionII"          "0x00000000"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000000"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"         "off"
# === QBS Management ===
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
# === FSAA Management ===
    Option "FSAAEnable"                 "no"
    Option "FSAAScale"                  "1"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
    Option "UseFastTLS"                 "0"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "yes"
    Option "ForceGenericCPU"            "no"
    BusID "PCI:1:0:0"    # vendor=1002, device=4c66
    Screen 0
EndSection

Section "Device"
    Identifier                          "ATI Graphics Adapter Dual Head 1"
    Driver                              "fglrx"
    BusID "PCI:1:0:0"    # vendor=1002, device=4c66
    Screen 1
EndSection




### Screen Resolution and such
Section "Screen"
  Identifier	"ScreenNotDual"
  Device	"ATI Graphics Adapter NOT Dual Head"
  Monitor	"Monitor0"
  DefaultDepth	24
# Option	"backingstore"	# may be useful for things like VMWare and Win4Lin
  Subsection	"Display"
    Depth	24
    Modes	"1152x864" "1024x768" "800x600" "640x480"
    ViewPort	0 0  # initial origin if mode is smaller than desktop
  EndSubsection
EndSection

# Dual Head monitor 0
Section "Screen"
    Identifier  "ScreenDual0"
    Device      "ATI Graphics Adapter Dual Head 0"
    Monitor     "Monitor0"
    DefaultDepth 24
    #Option "backingstore"

    Subsection "Display"
        Depth       24
        Modes       "1152x864" "1024x768" "800x600" "640x480"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual     1280 1024
    EndSubsection
EndSection

# Dual Head monitor 1
Section "Screen"
    Identifier  "ScreenDual1"
    Device      "ATI Graphics Adapter Dual Head 1"
    Monitor     "Monitor1"
    DefaultDepth 24
    #Option "backingstore"

    Subsection "Display"
        Depth       24
        Modes	    "1152x864" "1024x768" "800x600" "640x480"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual     1280 1024
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

### Bring it all together to figure out the Input Devices, Screen Device, etc

Section "ServerLayout"
  Identifier   "Layout[all]"

# NOTE: If NOT using Dual Head mode, uncomment first line and comment other Dual Head options
  Screen       "ScreenNotDual"
# OPTIONS FOR DUAL HEAD MODE
# NOTE: If USING Dual Head mode, comment previous item and uncomment next item
#Screen "ScreenDual0"
# NOTE: If USING Dual Head mode, uncomment ONE of the next 4 items
#Screen "ScreenDual1" RightOf	"ScreenDual0"	# screen1 goes on right
#  Screen "ScreenDual1" LeftOf  "ScreenDual0"	# screen1 goes on left
#  Screen "ScreenDual1" Above   "ScreenDual0"	# screen1 goes on top
#  Screen "ScreenDual1" Below   "ScreenDual0"	# screen1 goes on bottom


# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

### EOF ###
 
Ja, daheim auf meinem Notebook mit ATI Radeon Mobility 9000 tut der Treiber ganz gut. Aus der Config-Datei, die von "fglrxconfig" erstellt wird, kann man die Device-Section übernehmen und in eine Example-xorg.conf integrieren. Dann sollte das passen.
 
das wird der vom Kernel sein weil da steht:

agpgart 33096 1 sis_agp

das hier
"UseInternalAGPGART" ist auf yes

wie hier auch geschrieben
http://www.gentooforum.de/artikel/4721/1/Mini-Howto-ATI-xorg-68.html
"Damit ist der agptreiber des Mainboardchipsatzes oder beim AMD64 CPU zugehörige agpgart gemeint.
Antwortet ihr mit "no", so wird der ATI agpgart benutzt.
Das kann mindere Leistung zur Folge haben."

der sagt aber man soll no einstellen
http://www.gentooforum.de/artikel/4721/1/Mini-Howto-ATI-xorg-68.html
"Wenn Ihr /dev/agpgart (AGP Support) fest eincompiliert muss später in der /etc/X11/xorg.conf "UseInternalAGPGART" auf "no" gesetzt werden bzw. als Modul (agpgart) ebensolches geladen werden. "


Ich denke aber das bei mir "yes" richtig ist

sowas hab ich bei mir nicht, auch nicht als Datei:
/etc/modules.autoload.d/kernel-2.6

in der DRM section ist im Kernel glaube ich alles als Modul konfiguriert, bin mir aber nicht sicher. "radeon" ist ein Modul und nicht geladen

wichtiger wäre mir aber das Zeugs mit Video ob man irgendwo was Overlaymäßig einstellen kann bei Videoquellen
 
Ach ja, diese widersprüchliche Einstellung und Frage beim konfigurieren des Ati-Modules....

Also, möchte man den Kernel-AGP nutzen, sollte in dier xorg.conf bei "UseInternalAGP" ein "no" stehen.

Um den selben Effekt über das Konfig-Tool zu erreichen, muss man bei der Frage "Do you want to use the external AGP GART module (y/n)? [n]" mit "y" antworten.

Super verwirrend, aber wenn man sich die Fragen, bzw. Konfigeinstellungen mal grob im Kopf übersetzt, wird es klar......

Sollte es zumindestens. :D

Bitspyer
 

Ähnliche Themen

Fuddelbaerentatze
Wie muß ich die xorg.conf editieren - mein Monitor pfeift seit Upadte auf KDE 4.6
Antworten
6
Aufrufe
2K
Fuddelbaerentatze
Fuddelbaerentatze
Ragas
Twin View flascher Bildschirm
Antworten
2
Aufrufe
896
Ragas
Ragas
Diablo
gentoo: wechsel auf modularen xserver
Antworten
15
Aufrufe
1K
Diablo
Diablo
benzo
Framebuffer und X.org
Antworten
1
Aufrufe
777
Ragas
Ragas
M
Fedora Core 5: Monitor wird mit zu hoher Wiederholfrequenz betrieben
Antworten
3
Aufrufe
1K
ThePsycho
T
Zurück
Oben Unten