App installieren
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Anmerkung: This feature may not be available in some browsers.
Du verwendest einen veralteten Browser. Es ist möglich, dass diese oder andere Websites nicht korrekt angezeigt werden.
Du solltest ein Upgrade durchführen oder ein alternativer Browser verwenden.
Du solltest ein Upgrade durchführen oder ein alternativer Browser verwenden.
gentoo: wechsel auf modularen xserver
- Ersteller Diablo
- Erstellt am
Diablo
Grand Admiral Special
- Mitglied seit
- 11.11.2001
- Beiträge
- 2.951
- Renomée
- 2
- Standort
- Passau
- Prozessor
- AMD Athlon XP Barton 2500+
- Mainboard
- Epox 8KRA2+
- Kühlung
- AMD Boxed
- Speicher
- 512 MB Samsung + 256 MB Infineon
- Grafikprozessor
- GeForce 5900XT
- Display
- Samsung SyncMaster 900SL
- HDD
- Maxtor 6B200MO (200GB, SATA) + 6Y160M0 (160GB, SATA) + Excelstor J880 (80GB, IDE)
- Optisches Laufwerk
- LG GSA-4120B
- Soundkarte
- SBLive! Player 1024
- Gehäuse
- Thermaltake Shark
- Netzteil
- Enermax Liberty 400W
- Betriebssystem
- Debian SID, Linux 2.6.15.1
- Verschiedenes
- Technisat SkyStar2 (DVB-S)
Hi!
Ich hab ein Problem mit dem Wechsel auf den modularen X-Server.
Ich hab den Fehler wie hier unten beschrieben:
ich bin auch so vorgegangen wie dort steht, hab auch zufälligerweise das Logitech Cordless Internet Keyboard, nur funktioniert es nicht!
wenn ich "setxkbmap" ausführe, dann bekomm ich einen Fehler:
Denke allerdings nicht dass der Fehler an dem liegt, aber leider bekomme ich gar keinen Fehler im Log.
ich boote gleich mal ins Knoppix und poste die xorg.conf und die Xorg.0.log rein.
Hofffe ihr könnt mir weiterhelfen
//EDIT:
hier mal das Log
und hier die xorg.config
Ich hab ein Problem mit dem Wechsel auf den modularen X-Server.
Ich hab den Fehler wie hier unten beschrieben:
Code:
(WW) Couldn't load XKB keymap, falling back to pre-XKB keymap
ich bin auch so vorgegangen wie dort steht, hab auch zufälligerweise das Logitech Cordless Internet Keyboard, nur funktioniert es nicht!
wenn ich "setxkbmap" ausführe, dann bekomm ich einen Fehler:
Code:
# setxkbkeymap -model logiik -layout de
# Cannot open display "default display"
Denke allerdings nicht dass der Fehler an dem liegt, aber leider bekomme ich gar keinen Fehler im Log.
ich boote gleich mal ins Knoppix und poste die xorg.conf und die Xorg.0.log rein.
Hofffe ihr könnt mir weiterhelfen
//EDIT:
hier mal das Log
Code:
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Generic Keyboard: XkbModel: "logiik"
(**) Option "XkbLayout" "de"
(**) Generic Keyboard: XkbLayout: "de"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ImPS/2"
(**) Generic Mouse: Device: "/dev/input/mice"
(**) Generic Mouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Generic Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Generic Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Generic Mouse: ZAxisMapping: buttons 4 and 5
(**) Generic Mouse: Buttons: 9
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Generic Keyboard: XkbModel: "logiik"
(**) Option "XkbLayout" "de"
(**) Generic Keyboard: XkbLayout: "de"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Generic Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
xkb_keycodes { include "xfree86+aliases(qwertz)" };
xkb_types { include "complete" };
xkb_compatibility { include "complete" };
xkb_symbols { include "pc(pc105)+de+inet(logiik)" };
xkb_geometry { include "pc(pc104)" };
xkb_keycodes { include "xfree86+aliases(qwertz)" };
xkb_types { include "complete" };
xkb_compatibility { include "complete" };
xkb_symbols { include "pc(pc105)+de+inet(logiik)" };
xkb_geometry { include "pc(pc104)" };
(II) Generic Mouse: ps2EnableDataReporting: succeeded
FreeFontPath: FPE "/usr/share/fonts/misc" refcount is 2, should be 1; fixing.
und hier die xorg.config
Code:
Section "Files"
#FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/CID"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
FontPath "/usr/lib/X11/fonts/truetype"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
# Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "XkbModel" "logiik"
Option "XkbLayout" "de"
# Option "XkbLayout" "nodeadkeys"
# Option "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
EndSection
#Section "InputDevice"
# Identifier "LIRC-Mouse"
# Driver "mouse"
# Option "Device" "/dev/lircm"
# Option "Protocol" "IntelliMouse"
# Option "SendCoreEvents"
# Option "Buttons" "5"
# Option "ZAxisMapping" "4 5"
#EndSection
Section "Device"
Identifier "GeForce"
Driver "nvidia"
Option "UseFBDev" "false"
# Option "NoLogo" "1"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 31.5 - 91.1
VertRefresh 60 - 100
Option "DPMS"
Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
EndSection
Section "Screen"
Identifier "Screen0"
Device "GeForce"
Monitor "Monitor0"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller than desktop
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Screen0"
InputDevice "Generic Keyboard"
InputDevice "Generic Mouse"
# InputDevice "LIRC-Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
Zuletzt bearbeitet:
PuckPoltergeist
Grand Admiral Special
Tastaturtreiber installiert? (x11-drivers/xf86-input-keyboard)
Diablo
Grand Admiral Special
- Mitglied seit
- 11.11.2001
- Beiträge
- 2.951
- Renomée
- 2
- Standort
- Passau
- Prozessor
- AMD Athlon XP Barton 2500+
- Mainboard
- Epox 8KRA2+
- Kühlung
- AMD Boxed
- Speicher
- 512 MB Samsung + 256 MB Infineon
- Grafikprozessor
- GeForce 5900XT
- Display
- Samsung SyncMaster 900SL
- HDD
- Maxtor 6B200MO (200GB, SATA) + 6Y160M0 (160GB, SATA) + Excelstor J880 (80GB, IDE)
- Optisches Laufwerk
- LG GSA-4120B
- Soundkarte
- SBLive! Player 1024
- Gehäuse
- Thermaltake Shark
- Netzteil
- Enermax Liberty 400W
- Betriebssystem
- Debian SID, Linux 2.6.15.1
- Verschiedenes
- Technisat SkyStar2 (DVB-S)
ja, ist installiert. Hab das ganze paket xorg-server installiert.
mich macht das Ganze nur so stutzig, weil ja kein Fehler im xorg-log drinnen ist.
//EDIT:
Allerdings hab ich jetzt ein anderes Verhalten, der X-Server versucht ca. 10 mal zu starten, es erscheint immer das Nvidia Logo und dann bricht er wieder zusammen. Nach den 10 Versuchen hat ers aufgegeben mit der selben Fehlermeldung wie oben.
mich macht das Ganze nur so stutzig, weil ja kein Fehler im xorg-log drinnen ist.
//EDIT:
Allerdings hab ich jetzt ein anderes Verhalten, der X-Server versucht ca. 10 mal zu starten, es erscheint immer das Nvidia Logo und dann bricht er wieder zusammen. Nach den 10 Versuchen hat ers aufgegeben mit der selben Fehlermeldung wie oben.
Zuletzt bearbeitet:
PuckPoltergeist
Grand Admiral Special
Im modularen XOrg-Build ist der Treiber nicht im xorg-server enthalten, sondern ein eigenes Paket.ja, ist installiert. Hab das ganze paket xorg-server installiert.
Diablo
Grand Admiral Special
- Mitglied seit
- 11.11.2001
- Beiträge
- 2.951
- Renomée
- 2
- Standort
- Passau
- Prozessor
- AMD Athlon XP Barton 2500+
- Mainboard
- Epox 8KRA2+
- Kühlung
- AMD Boxed
- Speicher
- 512 MB Samsung + 256 MB Infineon
- Grafikprozessor
- GeForce 5900XT
- Display
- Samsung SyncMaster 900SL
- HDD
- Maxtor 6B200MO (200GB, SATA) + 6Y160M0 (160GB, SATA) + Excelstor J880 (80GB, IDE)
- Optisches Laufwerk
- LG GSA-4120B
- Soundkarte
- SBLive! Player 1024
- Gehäuse
- Thermaltake Shark
- Netzteil
- Enermax Liberty 400W
- Betriebssystem
- Debian SID, Linux 2.6.15.1
- Verschiedenes
- Technisat SkyStar2 (DVB-S)
Im modularen XOrg-Build ist der Treiber nicht im xorg-server enthalten, sondern ein eigenes Paket.
ok, ich hab folgende Treiber nachinstalliert:
video-nv
input-mouse
video-vesa
input-keyboard
danach ist das Verhalten wie oben beschrieben aufgetreten.
.
EDIT :
.
ach ja, ein "revdep-rebuild" hab ich noch nicht durchgeführt und ein "emerge -uD world" auch noch nicht. Kann es vielleicht an dem liegen?
PuckPoltergeist
Grand Admiral Special
EDIT :
.[/color]
ach ja, ein "revdep-rebuild" hab ich noch nicht durchgeführt und ein "emerge -uD world" auch noch nicht. Kann es vielleicht an dem liegen?
Nein, das ist nicht relevant, AFAIK. Ich geb dir mal den entsprechenden Auszug aus meiner xorg.conf, auf dass du mal vergleichen kannst:
Code:
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
EndSection
Diablo
Grand Admiral Special
- Mitglied seit
- 11.11.2001
- Beiträge
- 2.951
- Renomée
- 2
- Standort
- Passau
- Prozessor
- AMD Athlon XP Barton 2500+
- Mainboard
- Epox 8KRA2+
- Kühlung
- AMD Boxed
- Speicher
- 512 MB Samsung + 256 MB Infineon
- Grafikprozessor
- GeForce 5900XT
- Display
- Samsung SyncMaster 900SL
- HDD
- Maxtor 6B200MO (200GB, SATA) + 6Y160M0 (160GB, SATA) + Excelstor J880 (80GB, IDE)
- Optisches Laufwerk
- LG GSA-4120B
- Soundkarte
- SBLive! Player 1024
- Gehäuse
- Thermaltake Shark
- Netzteil
- Enermax Liberty 400W
- Betriebssystem
- Debian SID, Linux 2.6.15.1
- Verschiedenes
- Technisat SkyStar2 (DVB-S)
poste bitte noch den Teil mit den Fonts ganz oben dazu.
PuckPoltergeist
Grand Admiral Special
Code:
Section "Files"
FontPath "/usr/share/fonts/corefonts/"
FontPath "/usr/share/fonts/sharefonts"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Diablo
Grand Admiral Special
- Mitglied seit
- 11.11.2001
- Beiträge
- 2.951
- Renomée
- 2
- Standort
- Passau
- Prozessor
- AMD Athlon XP Barton 2500+
- Mainboard
- Epox 8KRA2+
- Kühlung
- AMD Boxed
- Speicher
- 512 MB Samsung + 256 MB Infineon
- Grafikprozessor
- GeForce 5900XT
- Display
- Samsung SyncMaster 900SL
- HDD
- Maxtor 6B200MO (200GB, SATA) + 6Y160M0 (160GB, SATA) + Excelstor J880 (80GB, IDE)
- Optisches Laufwerk
- LG GSA-4120B
- Soundkarte
- SBLive! Player 1024
- Gehäuse
- Thermaltake Shark
- Netzteil
- Enermax Liberty 400W
- Betriebssystem
- Debian SID, Linux 2.6.15.1
- Verschiedenes
- Technisat SkyStar2 (DVB-S)
hm, immer noch selber Fehler, hat nichts gebracht
PuckPoltergeist
Grand Admiral Special
hm, immer noch selber Fehler, hat nichts gebracht
Hast du für XkbModel mal pc105 eingesetzt? Ansonst kann ich erstmal nur Desti beifplichten, lass für die Fehlersuche alles weg, was nicht wirklich essentiell ist.
Diablo
Grand Admiral Special
- Mitglied seit
- 11.11.2001
- Beiträge
- 2.951
- Renomée
- 2
- Standort
- Passau
- Prozessor
- AMD Athlon XP Barton 2500+
- Mainboard
- Epox 8KRA2+
- Kühlung
- AMD Boxed
- Speicher
- 512 MB Samsung + 256 MB Infineon
- Grafikprozessor
- GeForce 5900XT
- Display
- Samsung SyncMaster 900SL
- HDD
- Maxtor 6B200MO (200GB, SATA) + 6Y160M0 (160GB, SATA) + Excelstor J880 (80GB, IDE)
- Optisches Laufwerk
- LG GSA-4120B
- Soundkarte
- SBLive! Player 1024
- Gehäuse
- Thermaltake Shark
- Netzteil
- Enermax Liberty 400W
- Betriebssystem
- Debian SID, Linux 2.6.15.1
- Verschiedenes
- Technisat SkyStar2 (DVB-S)
Ich hab nun einige Module auskommentiert, nun komm ich zumindest in TWM rein. KDE wird mir momentan nicht gestartet, "startkde" existiert noch nicht.
ich bin grad beim emerge -uD world, denke mal das liegt daran. Das dauert erstmal seine Zeit... Aber wenn twm funktioniert, dann müsste KDE auch funktionieren denk ich mal.
ich geh jetzt erstmal ein wenig joggen und dann meld ich mich wieder obs auchmit KDE funktioniert hat (falls es bis dahin schon fertig ist)
ich bin grad beim emerge -uD world, denke mal das liegt daran. Das dauert erstmal seine Zeit... Aber wenn twm funktioniert, dann müsste KDE auch funktionieren denk ich mal.
ich geh jetzt erstmal ein wenig joggen und dann meld ich mich wieder obs auchmit KDE funktioniert hat (falls es bis dahin schon fertig ist)
tomturbo
Technische Administration, Dinosaurier
- Mitglied seit
- 30.11.2005
- Beiträge
- 9.455
- Renomée
- 665
- Standort
- Österreich
- Aktuelle Projekte
- Universe@HOME, Asteroids@HOME
- Lieblingsprojekt
- SETI@HOME
- Meine Systeme
- Xeon E3-1245V6; Raspberry Pi 4; Ryzen 1700X; EPIC 7351
- BOINC-Statistiken
- Mein Laptop
- Microsoft Surface Pro 4
- Prozessor
- R7 5800X
- Mainboard
- Asus ROG STRIX B550-A GAMING
- Kühlung
- Alpenfön Ben Nevis Rev B
- Speicher
- 2x32GB Mushkin, D464GB 3200-22 Essentials
- Grafikprozessor
- Sapphire Radeon RX 460 2GB
- Display
- BenQ PD3220U, 31.5" 4K
- SSD
- 1x HP SSD EX950 1TB, 1x SAMSUNG SSD 830 Series 256 GB, 1x Crucial_CT256MX100SSD1
- HDD
- Toshiba X300 5TB
- Optisches Laufwerk
- Samsung Brenner
- Soundkarte
- onboard
- Gehäuse
- Fractal Design Define R4
- Netzteil
- XFX 550W
- Tastatur
- Trust ASTA mechanical
- Maus
- irgend eine silent Maus
- Betriebssystem
- Arch Linux, Windows VM
- Webbrowser
- Firefox + Chromium + Konqueror
- Internetanbindung
-
▼300
▲50
Hi Diablo,
im make.conf hast Du aber schon die notwendigen Variablen gesetzt, oder?
z.B.:
lg
__tom
im make.conf hast Du aber schon die notwendigen Variablen gesetzt, oder?
z.B.:
PHP:
INPUT_DEVICES="keyboard mouse evdev"
VIDEO_CARDS="radeon vesa fbdev vga"
lg
__tom
Diablo
Grand Admiral Special
- Mitglied seit
- 11.11.2001
- Beiträge
- 2.951
- Renomée
- 2
- Standort
- Passau
- Prozessor
- AMD Athlon XP Barton 2500+
- Mainboard
- Epox 8KRA2+
- Kühlung
- AMD Boxed
- Speicher
- 512 MB Samsung + 256 MB Infineon
- Grafikprozessor
- GeForce 5900XT
- Display
- Samsung SyncMaster 900SL
- HDD
- Maxtor 6B200MO (200GB, SATA) + 6Y160M0 (160GB, SATA) + Excelstor J880 (80GB, IDE)
- Optisches Laufwerk
- LG GSA-4120B
- Soundkarte
- SBLive! Player 1024
- Gehäuse
- Thermaltake Shark
- Netzteil
- Enermax Liberty 400W
- Betriebssystem
- Debian SID, Linux 2.6.15.1
- Verschiedenes
- Technisat SkyStar2 (DVB-S)
Hi Diablo,
im make.conf hast Du aber schon die notwendigen Variablen gesetzt, oder?
z.B.:
PHP:INPUT_DEVICES="keyboard mouse evdev" VIDEO_CARDS="radeon vesa fbdev vga"
lg
__tom
Na toll, emerge ist bei intltool gehängt, wird sich wohl noch eine Weile ziehen bis das update fertig ist...
ja, hab die selben Variablen wie du oben gesetzt, nur anstatt radeon nvidia.
Monstar
Vice Admiral Special
- Mitglied seit
- 11.11.2001
- Beiträge
- 527
- Renomée
- 8
versuche mal.
Obwohl ich es überhaupt nicht leiden kann das in meinr xorg.conf Microsoft steht, funktioniert es am besten.
Solltest du Interesse an meiner xorg.conf für Nvidia inkl TwinViews, Xinerama haben poste ich sie gerne.
Code:
Option "XkbModel" "Microsoft"
Obwohl ich es überhaupt nicht leiden kann das in meinr xorg.conf Microsoft steht, funktioniert es am besten.
Solltest du Interesse an meiner xorg.conf für Nvidia inkl TwinViews, Xinerama haben poste ich sie gerne.
Diablo
Grand Admiral Special
- Mitglied seit
- 11.11.2001
- Beiträge
- 2.951
- Renomée
- 2
- Standort
- Passau
- Prozessor
- AMD Athlon XP Barton 2500+
- Mainboard
- Epox 8KRA2+
- Kühlung
- AMD Boxed
- Speicher
- 512 MB Samsung + 256 MB Infineon
- Grafikprozessor
- GeForce 5900XT
- Display
- Samsung SyncMaster 900SL
- HDD
- Maxtor 6B200MO (200GB, SATA) + 6Y160M0 (160GB, SATA) + Excelstor J880 (80GB, IDE)
- Optisches Laufwerk
- LG GSA-4120B
- Soundkarte
- SBLive! Player 1024
- Gehäuse
- Thermaltake Shark
- Netzteil
- Enermax Liberty 400W
- Betriebssystem
- Debian SID, Linux 2.6.15.1
- Verschiedenes
- Technisat SkyStar2 (DVB-S)
Also, ich habs jetzt so eingestellt:versuche mal.
Code:Option "XkbModel" "Microsoft"
Obwohl ich es überhaupt nicht leiden kann das in meinr xorg.conf Microsoft steht, funktioniert es am besten.
Solltest du Interesse an meiner xorg.conf für Nvidia inkl TwinViews, Xinerama haben poste ich sie gerne.
Code:
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
Allerdings wäre ich trotzdem an deiner kompletten xorg.conf interessiert, weil ich mich mit der noch nie so richtig beschäftigt habt. Meine jetzige hab ich noch von meinem Debian System aus XFree86 übernommen. Denk es wär nicht schlecht wenn ich die mal etwas ausmisten würd.
//EDIT:
So, nun ist grad das Kompilieren fertig geworden. Funktioniert auch alles im KDE wunderbar.
Danke euch allen!
Zuletzt bearbeitet:
Ähnliche Themen
- Antworten
- 4
- Aufrufe
- 2K
- Antworten
- 6
- Aufrufe
- 2K
- Antworten
- 2
- Aufrufe
- 2K
- Antworten
- 2
- Aufrufe
- 900
- Antworten
- 16
- Aufrufe
- 7K