Boinc mit Dockers Container auf Synology Diskstation DS716+II

Thyler Durden

Admiral Special
★ Themenstarter ★
Mitglied seit
27.06.2002
Beiträge
1.433
Renomée
120
Standort
Tyrol
  • BOINC Pentathlon 2015
  • BOINC Pentathlon 2016
  • BOINC Pentathlon 2017
  • BOINC Pentathlon 2018
  • BOINC Pentathlon 2019
  • SETI@Home Wow!-Event 2019
  • BOINC Pentathlon 2020
  • THOR Challenge 2020
Hier möchte ich eine Wissenssammlung evtl. ein to do starten.
Das Interesse ist stark das Wissen ist momentan schwach und Zeit habe ich im Moment 7 Tage. ;D
Ich will das letzte Rechenkraft aus dem kleinen Ding rauskitzeln

- per integriertem Packetload kann man sich schon fertige Container downloaden und ausführen.

3 Container habe ich zur Probe mal ausgeführt



Log laurentmalvert-docker-boinc1
laurentmalvert-docker-boinc1
date stream content
2017-01-12 12:23:56 stdout 12-Jan-2017 12:23:56 Initialization completed
2017-01-12 12:23:56 stdout 12-Jan-2017 12:23:56 [---] Visit http://boinc.berkeley.edu for instructions
2017-01-12 12:23:56 stdout 12-Jan-2017 12:23:56 [---] This computer is not attached to any projects
2017-01-12 12:23:56 stdout 12-Jan-2017 12:23:56 [---] Not using a proxy
2017-01-12 12:23:56 stdout 12-Jan-2017 12:23:56 [---] gui_rpc_auth.cfg is empty - no GUI RPC password protection
2017-01-12 12:23:56 stdout dir_open: Could not open directory 'slots' from '/var/lib/boinc-client'.
2017-01-12 12:23:56 stdout 12-Jan-2017 12:23:56 [---] (to change preferences, visit a project web site or select Preferences in the Manager)
2017-01-12 12:23:56 stdout 12-Jan-2017 12:23:56 [---] suspend work if non-BOINC CPU load exceeds 25%
2017-01-12 12:23:56 stdout 12-Jan-2017 12:23:56 [---] don't use GPU while active
2017-01-12 12:23:56 stdout 12-Jan-2017 12:23:56 [---] max disk usage: 3718.84GB
2017-01-12 12:23:56 stdout 12-Jan-2017 12:23:56 [---] max memory usage when idle: 1725.66MB
2017-01-12 12:23:56 stdout 12-Jan-2017 12:23:56 [---] max memory usage when active: 958.70MB
2017-01-12 12:23:56 stdout 12-Jan-2017 12:23:56 [---] Preferences:
2017-01-12 12:23:56 stdout 12-Jan-2017 12:23:56 [---] Reading preferences override file
2017-01-12 12:23:56 stdout 12-Jan-2017 12:23:56 [---] No general preferences found - using defaults
2017-01-12 12:23:56 stdout 12-Jan-2017 12:23:56 [---] Config: GUI RPCs allowed from:
2017-01-12 12:23:56 stdout 12-Jan-2017 12:23:56 [---] Local time is UTC +0 hours
2017-01-12 12:23:56 stdout 12-Jan-2017 12:23:56 [---] Disk: 5.24 TB total, 3.63 TB free
2017-01-12 12:23:56 stdout 12-Jan-2017 12:23:56 [---] Memory: 1.87 GB physical, 3.12 GB virtual
2017-01-12 12:23:56 stdout 12-Jan-2017 12:23:56 [---] OS: Linux: 3.10.77
2017-01-12 12:23:56 stdout 12-Jan-2017 12:23:56 [---] Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid tsc_adjust smep erms
2017-01-12 12:23:56 stdout 12-Jan-2017 12:23:56 [---] Processor: 4 GenuineIntel Intel(R) Celeron(R) CPU N3160 @ 1.60GHz [Family 6 Model 76 Stepping 4]
2017-01-12 12:23:56 stdout 12-Jan-2017 12:23:56 [---] Host name: laurentmalvert-docker-boinc1
2017-01-12 12:23:56 stdout 12-Jan-2017 12:23:56 [---] No usable GPUs found
2017-01-12 12:23:56 stdout 12-Jan-2017 12:23:56 [---] GPU detection failed. error code 512
2017-01-12 12:23:56 stdout execv: No such file or directory
2017-01-12 12:23:56 stdout 12-Jan-2017 12:23:56 [---] Data directory: /var/lib/boinc-client
2017-01-12 12:23:56 stdout 12-Jan-2017 12:23:56 [---] Libraries: libcurl/7.38.0 OpenSSL/1.0.1t zlib/1.2.8 libidn/1.29 libssh2/1.4.3 librtmp/2.3
2017-01-12 12:23:56 stdout 12-Jan-2017 12:23:56 [---] log flags: file_xfer, sched_ops, task
2017-01-12 12:23:56 stdout 12-Jan-2017 12:23:56 [---] Starting BOINC client version 7.4.23 for x86_64-pc-linux-gnu
2017-01-12 12:23:55 stdout invoke-rc.d: policy-rc.d denied execution of start.
2017-01-12 12:23:55 stdout invoke-rc.d: policy-rc.d denied execution of stop.
2017-01-12 12:23:55 stdout debconf: falling back to frontend: Teletype
2017-01-12 12:23:55 stdout debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.20.2 /usr/local/share/perl/5.20.2 /usr/lib/x86_64-linux-gnu/perl5/5.20 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.20 /usr/share/perl/5.20 /usr/local/lib/site_perl .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.)
2017-01-12 12:23:55 stdout debconf: unable to initialize frontend: Readline
2017-01-12 12:23:55 stdout debconf: falling back to frontend: Readline
2017-01-12 12:23:55 stdout debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
2017-01-12 12:23:55 stdout debconf: unable to initialize frontend: Dialog
2017-01-12 12:19:55 stdout 12-Jan-2017 12:19:54 [---] Exiting
2017-01-12 12:19:54 stdout 12-Jan-2017 12:19:54 [---] Received signal 15
2017-01-12 11:31:44 stdout run
2017-01-12 11:30:01 stdout l
2017-01-12 11:29:56 stdout
2017-01-12 11:29:55 stdout d#
2017-01-12 11:29:23 stdout 12-Jan-2017 11:29:23 Initialization completed
2017-01-12 11:29:23 stdout 12-Jan-2017 11:29:22 [---] Visit http://boinc.berkeley.edu for instructions
2017-01-12 11:29:23 stdout 12-Jan-2017 11:29:22 [---] This computer is not attached to any projects
2017-01-12 11:29:23 stdout 12-Jan-2017 11:29:22 [---] Not using a proxy
2017-01-12 11:29:23 stdout 12-Jan-2017 11:29:22 [---] gui_rpc_auth.cfg is empty - no GUI RPC password protection
2017-01-12 11:29:23 stdout dir_open: Could not open directory 'slots' from '/var/lib/boinc-client'.
2017-01-12 11:29:23 stdout 12-Jan-2017 11:29:22 [---] (to change preferences, visit a project web site or select Preferences in the Manager)
2017-01-12 11:29:23 stdout 12-Jan-2017 11:29:22 [---] suspend work if non-BOINC CPU load exceeds 25%
2017-01-12 11:29:23 stdout 12-Jan-2017 11:29:22 [---] don't use GPU while active
2017-01-12 11:29:23 stdout 12-Jan-2017 11:29:22 [---] max disk usage: 3719.50GB
2017-01-12 11:29:23 stdout 12-Jan-2017 11:29:22 [---] max memory usage when idle: 1725.66MB
2017-01-12 11:29:23 stdout 12-Jan-2017 11:29:22 [---] max memory usage when active: 958.70MB
2017-01-12 11:29:23 stdout 12-Jan-2017 11:29:22 [---] Preferences:
2017-01-12 11:29:23 stdout 12-Jan-2017 11:29:22 [---] Reading preferences override file
2017-01-12 11:29:23 stdout 12-Jan-2017 11:29:22 [---] No general preferences found - using defaults
2017-01-12 11:29:22 stdout 12-Jan-2017 11:29:22 [---] Config: GUI RPCs allowed from:
2017-01-12 11:29:22 stdout 12-Jan-2017 11:29:22 [---] Local time is UTC +0 hours
2017-01-12 11:29:22 stdout 12-Jan-2017 11:29:22 [---] Disk: 5.24 TB total, 3.63 TB free
2017-01-12 11:29:22 stdout 12-Jan-2017 11:29:22 [---] Memory: 1.87 GB physical, 3.12 GB virtual
2017-01-12 11:29:22 stdout 12-Jan-2017 11:29:22 [---] OS: Linux: 3.10.77
2017-01-12 11:29:22 stdout 12-Jan-2017 11:29:22 [---] Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid tsc_adjust smep erms
2017-01-12 11:29:22 stdout 12-Jan-2017 11:29:22 [---] Processor: 4 GenuineIntel Intel(R) Celeron(R) CPU N3160 @ 1.60GHz [Family 6 Model 76 Stepping 4]
2017-01-12 11:29:22 stdout 12-Jan-2017 11:29:22 [---] Host name: laurentmalvert-docker-boinc1
2017-01-12 11:29:22 stdout 12-Jan-2017 11:29:22 [---] Creating new client state file
2017-01-12 11:29:22 stdout 12-Jan-2017 11:29:22 [---] No usable GPUs found
2017-01-12 11:29:22 stdout 12-Jan-2017 11:29:22 [---] GPU detection failed. error code 512
2017-01-12 11:29:22 stdout execv: No such file or directory
2017-01-12 11:29:22 stdout 12-Jan-2017 11:29:22 [---] Data directory: /var/lib/boinc-client
2017-01-12 11:29:22 stdout 12-Jan-2017 11:29:22 [---] Libraries: libcurl/7.38.0 OpenSSL/1.0.1t zlib/1.2.8 libidn/1.29 libssh2/1.4.3 librtmp/2.3
2017-01-12 11:29:22 stdout 12-Jan-2017 11:29:22 [---] log flags: file_xfer, sched_ops, task
2017-01-12 11:29:22 stdout 12-Jan-2017 11:29:22 [---] Starting BOINC client version 7.4.23 for x86_64-pc-linux-gnu
2017-01-12 11:29:22 stdout invoke-rc.d: policy-rc.d denied execution of start.
2017-01-12 11:29:22 stdout invoke-rc.d: policy-rc.d denied execution of stop.
2017-01-12 11:29:22 stdout debconf: falling back to frontend: Teletype
2017-01-12 11:29:22 stdout debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.20.2 /usr/local/share/perl/5.20.2 /usr/lib/x86_64-linux-gnu/perl5/5.20 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.20 /usr/share/perl/5.20 /usr/local/lib/site_perl .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.)
2017-01-12 11:29:22 stdout debconf: unable to initialize frontend: Readline
2017-01-12 11:29:22 stdout debconf: falling back to frontend: Readline
2017-01-12 11:29:22 stdout debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
2017-01-12 11:29:22 stdout debconf: unable to initialize frontend: Dialog

der Milkyway Container verursacht schon Last ohne irgend eine Konfiguration von mir
log michaelzhangcn-boinc1
michaelzhangcn-boinc1
date stream content
2017-01-12 12:20:27 stdout 12-Jan-2017 12:20:27 [Milkyway@Home] Invalid or missing account key. To fix, remove and add this project.
2017-01-12 12:20:27 stdout 12-Jan-2017 12:20:27 [Milkyway@Home] Scheduler request completed: got 0 new tasks
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [Milkyway@Home] Requesting new tasks for CPU
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [Milkyway@Home] Reporting 4 completed tasks
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [Milkyway@Home] Sending scheduler request: To report completed tasks.
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 Initialization completed
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [---] Not using a proxy
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [Milkyway@Home] Task de_nonmodfit_fast_15_3s_136_sim1Aug1_2_1437561602_9933466_0 is 500.28 days overdue; you may not get credit for it. Consider aborting it.
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [Milkyway@Home] Task de_nonmodfit_fast_15_3s_136_sim1Aug1_2_1437561602_9903561_0 is 500.37 days overdue; you may not get credit for it. Consider aborting it.
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [---] (to change preferences, visit a project web site or select Preferences in the Manager)
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [---] suspend work if non-BOINC CPU load exceeds 25%
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [---] don't use GPU while active
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [---] max disk usage: 3718.84GB
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [---] max memory usage when idle: 1725.66MB
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [---] max memory usage when active: 958.70MB
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [---] Preferences:
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [---] No general preferences found - using defaults
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [Milkyway@Home] URL http://milkyway.cs.rpi.edu/milkyway/; Computer ID 628553; resource share 100
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [---] Already attached to http://milkyway.cs.rpi.edu/milkyway/
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [---] Config: GUI RPC allowed from any host
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [---] Config: simulate 4 CPUs
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [---] Local time is UTC +0 hours
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [---] Disk: 5.24 TB total, 3.63 TB free
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [---] Memory: 1.87 GB physical, 3.12 GB virtual
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [---] OS: Linux: 3.10.77
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [---] Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid tsc_adjust smep erms
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [---] Processor: 4 GenuineIntel Intel(R) Celeron(R) CPU N3160 @ 1.60GHz [Family 6 Model 76 Stepping 4]
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [---] Host name: michaelzhangcn-boinc1
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [---] No usable GPUs found
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [---] Data directory: /
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [---] Libraries: libcurl/7.35.0 OpenSSL/1.0.1f zlib/1.2.8 libidn/1.28 librtmp/2.3
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [---] log flags: file_xfer, sched_ops, task
2017-01-12 12:20:24 stdout 12-Jan-2017 12:20:24 [---] Starting BOINC client version 7.2.42 for x86_64-pc-linux-gnu
2017-01-12 11:46:50 stdout 12-Jan-2017 11:46:49 [---] Exit requested by user
2017-01-12 11:46:49 stdout 12-Jan-2017 11:46:49 [---] Received signal 15
2017-01-12 11:42:50 stdout
2017-01-12 11:42:50 stdout
2017-01-12 11:42:50 stdout
2017-01-12 11:42:48 stdout r
2017-01-12 11:42:39 stdout 12-Jan-2017 11:42:39 [---]
2017-01-12 11:42:39 stdout 12-Jan-2017 11:42:39 [---]
2017-01-12 11:42:39 stdout 12-Jan-2017 11:42:39 [---]
2017-01-12 11:42:39 stdout 12-Jan-2017 11:42:39 [---]
2017-01-12 11:42:11 stdout 12-Jan-2017 11:42:11 [Milkyway@Home] Invalid or missing account key. To fix, remove and add this project.
2017-01-12 11:42:11 stdout 12-Jan-2017 11:42:11 [Milkyway@Home] Scheduler request completed: got 0 new tasks
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:08 [Milkyway@Home] Requesting new tasks for CPU
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:08 [Milkyway@Home] Reporting 4 completed tasks
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:08 [Milkyway@Home] Sending scheduler request: To report completed tasks.
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:08 [Milkyway@Home] Aborting task de_modfit_fast_15_3s_136_sim1Aug1_2_1437561602_9986144_0; not started and deadline has passed
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:08 [Milkyway@Home] Aborting task de_modfit_fast_15_3s_136_sim1Aug1_1_1437561602_9981922_0; not started and deadline has passed
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:08 [Milkyway@Home] Aborting task de_80_DR8_Rev_8_5_00004_1437561602_13049546_0; not started and deadline has passed
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:08 [Milkyway@Home] Aborting task de_modfit_fast_15_3s_136_sim1Aug1_1_1437561602_9949995_0; not started and deadline has passed
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:08 [---] Suspending computation - CPU benchmarks in progress
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:08 [---] Running CPU benchmarks
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:08 Initialization completed
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:07 [---] Not using a proxy
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:07 [Milkyway@Home] Task de_nonmodfit_fast_15_3s_136_sim1Aug1_2_1437561602_9933466_0 is 500.25 days overdue; you may not get credit for it. Consider aborting it.
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:07 [Milkyway@Home] Task de_nonmodfit_fast_15_3s_136_sim1Aug1_2_1437561602_9903561_0 is 500.34 days overdue; you may not get credit for it. Consider aborting it.
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:07 [---] (to change preferences, visit a project web site or select Preferences in the Manager)
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:07 [---] suspend work if non-BOINC CPU load exceeds 25%
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:07 [---] don't use GPU while active
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:07 [---] max disk usage: 3718.84GB
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:07 [---] max memory usage when idle: 1725.66MB
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:07 [---] max memory usage when active: 958.70MB
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:07 [---] Preferences:
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:07 [---] No general preferences found - using defaults
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:07 [Milkyway@Home] URL http://milkyway.cs.rpi.edu/milkyway/; Computer ID 628553; resource share 100
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:07 [---] Already attached to http://milkyway.cs.rpi.edu/milkyway/
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:07 [---] Config: GUI RPC allowed from any host
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:07 [---] Config: simulate 4 CPUs
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:07 [---] Local time is UTC +0 hours
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:07 [---] Disk: 5.24 TB total, 3.63 TB free
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:07 [---] Memory: 1.87 GB physical, 3.12 GB virtual
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:07 [---] OS: Linux: 3.10.77
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:07 [---] Processor features: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch ida arat epb dtherm tpr_shadow vnmi flexpriority ept vpid tsc_adjust smep erms
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:07 [---] Processor: 4 GenuineIntel Intel(R) Celeron(R) CPU N3160 @ 1.60GHz [Family 6 Model 76 Stepping 4]
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:07 [---] Host name: michaelzhangcn-boinc1
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:07 [---] No usable GPUs found
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:07 [---] Data directory: /
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:07 [---] Libraries: libcurl/7.35.0 OpenSSL/1.0.1f zlib/1.2.8 libidn/1.28 librtmp/2.3
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:07 [---] log flags: file_xfer, sched_ops, task
2017-01-12 11:42:08 stdout 12-Jan-2017 11:42:07 [---] Starting BOINC client version 7.2.42 for x86_64-pc-linux-gnu

Log xavinux-ubuntu-boinc1
xavinux-ubuntu-boinc1
date stream content
2017-01-12 11:47:15 stdout ]0;root@xavinux-ubuntu-boinc1: /root@xavinux-ubuntu-boinc1:/# exit






so weit so gut aber hier komme ich nicht mehr weiter.

Kann man eine grafische Oberfläche nachträglich im Container installieren?
Ich bin zu unwissend um das für mich zu konfigurieren.
Wie gehts hier jetzt weiter? Am liebsten mit grafischer Oberfläche oder per remote an einen Rechner der eine grafische Oberfläche hat.
 

cyrusNGC_224

Grand Admiral Special
Mitglied seit
01.05.2014
Beiträge
5.774
Renomée
44
  • BOINC Pentathlon 2014
  • BOINC Pentathlon 2015
  • BOINC Pentathlon 2016
  • BOINC Pentathlon 2017
Naja, du könntest mit apt XFCE oder ähnlich leichtgewichtige Desktops installieren. Ich weiß aber nicht, ob diese VM da eine brauchbare GPU emuliert und ob und wie das dann funktioniert.
 

Thyler Durden

Admiral Special
★ Themenstarter ★
Mitglied seit
27.06.2002
Beiträge
1.433
Renomée
120
Standort
Tyrol
  • BOINC Pentathlon 2015
  • BOINC Pentathlon 2016
  • BOINC Pentathlon 2017
  • BOINC Pentathlon 2018
  • BOINC Pentathlon 2019
  • SETI@Home Wow!-Event 2019
  • BOINC Pentathlon 2020
  • THOR Challenge 2020
apt update && apt upgrade per Konsole funktioniert, Internetverbindung ist vorhanden
XFCE kann nicht installiert werden.
im Netzwerk sehe ich den Rechner nicht, der Container läuft im Bridge Modus und hat eine Subnetadresse

Kann man die Subnetzadresse vom Container ändern?
 

cyrusNGC_224

Grand Admiral Special
Mitglied seit
01.05.2014
Beiträge
5.774
Renomée
44
  • BOINC Pentathlon 2014
  • BOINC Pentathlon 2015
  • BOINC Pentathlon 2016
  • BOINC Pentathlon 2017
Na, du musst natürlich die richtige Syntax anwenden. Die findet man zu absolut jedem elementaren Tool immer mit man(ual).
Also man apt, man ls, man boinc, selbst man man.

Also apt install xfce4 (oder besser apt-get install xfce4), wenn das Ubuntu überhaupt im Repo hat.

Und die VM müsste mit NAT nach draußen geroutet werden, sonst kann man von draußen nicht auf das OS darinnen zugreifen. Bei VirtualBox geht das in den Netzwerkadaptereinstellungen, wie dort, weiß ich nicht.
 

REM!X

Admiral Special
Mitglied seit
21.10.2007
Beiträge
1.388
Renomée
13
Standort
im Web
  • Spinhenge ESL
  • Docking@Home
Hi @Thyler Durden,

bist du hier weitergekommen?

Du könntest den Container mit "docker run --network=<NETWORK>" starten.

Als Network dann "host" nehmen.

Gruß
 
Zuletzt bearbeitet:

Thyler Durden

Admiral Special
★ Themenstarter ★
Mitglied seit
27.06.2002
Beiträge
1.433
Renomée
120
Standort
Tyrol
  • BOINC Pentathlon 2015
  • BOINC Pentathlon 2016
  • BOINC Pentathlon 2017
  • BOINC Pentathlon 2018
  • BOINC Pentathlon 2019
  • SETI@Home Wow!-Event 2019
  • BOINC Pentathlon 2020
  • THOR Challenge 2020
leider nein, ich habe das erst einmal auf die lange bank geschoben.
Im Moment hatte und habe ich keine Zeit mich in die Materie einzuarbeiten, ich hatte mir das einfacher vorgestellt.
Da bin ich dann zu sehr der DAU, mal sehen evtl. im Herbst habe ich mehr Zeit dafür.
Das ist mehr nice to have.
 

herby44

Fleet Captain Special
Mitglied seit
14.09.2016
Beiträge
312
Renomée
9
Standort
Niedersachsen
  • BOINC Pentathlon 2017
  • BOINC Pentathlon 2018
  • BOINC Pentathlon 2019
  • BOINC Pentathlon 2020
  • THOR Challenge 2020
Ich hab zwar keine Synology Diskstation hier aber zwei Qnap Kisten eine TS-251 und eine TS453B-mini, auf beiden habe ich Docker
(Container Staion mit Docker und LXC) aktiviert ubuntu installiert, aktualisiert mc, boinc und boinctui installiert den openssh-server habe ich
auf der TS-251 noch installiert funktioniert aber nicht, dan ich habe noch die cc_config.xml angepasst führ den remotezugriff,
und komme mit einem BM von Win aus auf boinc in dem Container, es gibt auch ein Docker Image mit Ubuntu Dektop und VNC,
auf meinen beiden Qnap Kisten kan man auch eine Linux Station aktivieren mit Ubuntu mit Desktop installieren
das benötigt aber auch deutlich mehr recurcen war aber auch manchmal nicht erreichbar deswegen habe ich jetzt nur die version mit Konsole.
 
Zuletzt bearbeitet:
Oben Unten