App installieren
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Anmerkung: This feature may not be available in some browsers.
Du verwendest einen veralteten Browser. Es ist möglich, dass diese oder andere Websites nicht korrekt angezeigt werden.
Du solltest ein Upgrade durchführen oder ein alternativer Browser verwenden.
Du solltest ein Upgrade durchführen oder ein alternativer Browser verwenden.
Rewards für Arbeit in BOINC - Gridcoin, Obyte, etc...
- Ersteller koschi
- Erstellt am
koschi
Grand Admiral Special
- Mitglied seit
- 11.11.2001
- Beiträge
- 5.718
- Renomée
- 711
- Standort
- 0511
- Mitglied der Planet 3DNow! Kavallerie!
- Aktuelle Projekte
- sieher Banner
- Lieblingsprojekt
- WCG, Einstein, Universe
- Meine Systeme
- R7 3900X @ 85W + 2 x Vega 56, 8 x Odroid C2, 8 x Odroid XU4, 4 x Odroid N2, 3 x Nvidia Jetson TK1
- BOINC-Statistiken
- Folding@Home-Statistiken
- Prozessor
- R9 3900X
- Mainboard
- Asus PRIME X370 PRO
- Kühlung
- Thermalright Le Grand Macho RT
- Speicher
- 2x32 GB DDR4 Corsair Vengeance LPX 3200@3200
- Grafikprozessor
- 2 x Sapphire Pulse Vega 56
- Display
- LG UltraFine 32UN880-B
- SSD
- Samsung EVO Plus 870 1TB & 850 500GB, Crucial MX500 1TB
- Optisches Laufwerk
- PIONEER BDR-209DBK
- Soundkarte
- Nubert nuPro A-20 (USB), Pioneer SE-MS7BT(K) (BT)
- Gehäuse
- Fractal Design Define R5 PCGH
- Netzteil
- BeQuiet! StraightPower 11 850W
- Betriebssystem
- Ubuntu LTS
- Internetanbindung
- ▼220 ▲40
Gridcoin kostet ja nur alle 5 Monate mal 0.501 für einen Beacon, als Anzeiger dass man noch dabei ist.
Alle paar Monate mal die Software updaten, sonst frisst das kein Heu. Soweit zum Staking.
Du kannst aber auch deine Wallet sichern und Gridcoin löschen. Wenn Gridcoin in 2034 dann eine Fantastilion wert ist, importierst du deine Wallet bzw. den alten Key. Voila, der alte Kontostand ist wieder da.
Nur staking fand natürlich zwischenzeitlich nicht statt.
Ist die Transaktion angekommen?
Die Gebühren auf Layer 1 sind immer dolle wenn viel los ist
Alle paar Monate mal die Software updaten, sonst frisst das kein Heu. Soweit zum Staking.
Du kannst aber auch deine Wallet sichern und Gridcoin löschen. Wenn Gridcoin in 2034 dann eine Fantastilion wert ist, importierst du deine Wallet bzw. den alten Key. Voila, der alte Kontostand ist wieder da.
Nur staking fand natürlich zwischenzeitlich nicht statt.
Doppelposting wurde automatisch zusammengeführt:
Ist die Transaktion angekommen?
Die Gebühren auf Layer 1 sind immer dolle wenn viel los ist
MagicEye04
Grand Admiral Special
- Mitglied seit
- 20.03.2006
- Beiträge
- 23.271
- Renomée
- 1.853
- Standort
- oops,wrong.planet..
- Aktuelle Projekte
- Seti,WCG,Einstein + was gerade Hilfe braucht
- Lieblingsprojekt
- Seti
- Meine Systeme
- R7-1700+GTX1070ti,R7-1700+RadeonVII, FX-8350+GTX1050ti, X4-5350+GT1030, X2-240e+RX460
- BOINC-Statistiken
- Folding@Home-Statistiken
- Mein Laptop
- Dell Latitude E7240
- Prozessor
- R9-3950X (@65W)
- Mainboard
- Asus Prime B550plus
- Kühlung
- TR Macho
- Speicher
- 2x16GiB Corsair LPX2666C16
- Grafikprozessor
- Radeon VII
- Display
- LG 32UD99-W 81,3cm
- SSD
- Crucial MX500-250GB, Samsung EVO280 256GB
- HDD
- Seagate 7200.14 2TB (per eSATAp)
- Optisches Laufwerk
- LG DVDRAM GH24NS90
- Soundkarte
- onboard
- Gehäuse
- Nanoxia Deep Silence1
- Netzteil
- BeQuiet StraightPower 11 550W
- Tastatur
- Cherry RS6000
- Maus
- Logitech RX600
- Betriebssystem
- Ubuntu
- Webbrowser
- Feuerfuchs
- Verschiedenes
- 4x Nanoxia Lüfter (120/140mm) , Festplatte in Bitumenbox
Meine? Nö, immer noch nicht. Der Tab Transaktionen ist weiterhin leer und unten in der statuszeile steht immer noch "Synchronisiere..."Ist die Transaktion angekommen?
Ich hatte die coins an die Adresse geschickt, die im Tab Empfangen zu sehen ist. Oder war das falsch?
koschi
Grand Admiral Special
- Mitglied seit
- 11.11.2001
- Beiträge
- 5.718
- Renomée
- 711
- Standort
- 0511
- Mitglied der Planet 3DNow! Kavallerie!
- Aktuelle Projekte
- sieher Banner
- Lieblingsprojekt
- WCG, Einstein, Universe
- Meine Systeme
- R7 3900X @ 85W + 2 x Vega 56, 8 x Odroid C2, 8 x Odroid XU4, 4 x Odroid N2, 3 x Nvidia Jetson TK1
- BOINC-Statistiken
- Folding@Home-Statistiken
- Prozessor
- R9 3900X
- Mainboard
- Asus PRIME X370 PRO
- Kühlung
- Thermalright Le Grand Macho RT
- Speicher
- 2x32 GB DDR4 Corsair Vengeance LPX 3200@3200
- Grafikprozessor
- 2 x Sapphire Pulse Vega 56
- Display
- LG UltraFine 32UN880-B
- SSD
- Samsung EVO Plus 870 1TB & 850 500GB, Crucial MX500 1TB
- Optisches Laufwerk
- PIONEER BDR-209DBK
- Soundkarte
- Nubert nuPro A-20 (USB), Pioneer SE-MS7BT(K) (BT)
- Gehäuse
- Fractal Design Define R5 PCGH
- Netzteil
- BeQuiet! StraightPower 11 850W
- Betriebssystem
- Ubuntu LTS
- Internetanbindung
- ▼220 ▲40
Hmm, lädt der doch die ganze Bitcoin Blockchain herunter? Ich dachte das sei bei Electrum nicht nötig...
Schau mal nach dem Speicherplatzverbrauch. Aktuell ist die Blockchain 540GB groß, das könnte dann bissl dauern bis die geladen und verifiziert ist. Du kannst natürlich auch vorher schon mit dem Transaktionshash von Southxchange in einem Blockchain Explorer schauen, ob die Coins deiner neuen Adresse gutgeschrieben wurden.
Schau mal nach dem Speicherplatzverbrauch. Aktuell ist die Blockchain 540GB groß, das könnte dann bissl dauern bis die geladen und verifiziert ist. Du kannst natürlich auch vorher schon mit dem Transaktionshash von Southxchange in einem Blockchain Explorer schauen, ob die Coins deiner neuen Adresse gutgeschrieben wurden.
MagicEye04
Grand Admiral Special
- Mitglied seit
- 20.03.2006
- Beiträge
- 23.271
- Renomée
- 1.853
- Standort
- oops,wrong.planet..
- Aktuelle Projekte
- Seti,WCG,Einstein + was gerade Hilfe braucht
- Lieblingsprojekt
- Seti
- Meine Systeme
- R7-1700+GTX1070ti,R7-1700+RadeonVII, FX-8350+GTX1050ti, X4-5350+GT1030, X2-240e+RX460
- BOINC-Statistiken
- Folding@Home-Statistiken
- Mein Laptop
- Dell Latitude E7240
- Prozessor
- R9-3950X (@65W)
- Mainboard
- Asus Prime B550plus
- Kühlung
- TR Macho
- Speicher
- 2x16GiB Corsair LPX2666C16
- Grafikprozessor
- Radeon VII
- Display
- LG 32UD99-W 81,3cm
- SSD
- Crucial MX500-250GB, Samsung EVO280 256GB
- HDD
- Seagate 7200.14 2TB (per eSATAp)
- Optisches Laufwerk
- LG DVDRAM GH24NS90
- Soundkarte
- onboard
- Gehäuse
- Nanoxia Deep Silence1
- Netzteil
- BeQuiet StraightPower 11 550W
- Tastatur
- Cherry RS6000
- Maus
- Logitech RX600
- Betriebssystem
- Ubuntu
- Webbrowser
- Feuerfuchs
- Verschiedenes
- 4x Nanoxia Lüfter (120/140mm) , Festplatte in Bitumenbox
So viel Platz hätte ich nicht mal. Darum hatte ich den Electrum ja genommen.
Ich schaue heute abend mal. Aktuell ist es unverändert. Aber die SSD hätte längst voll sein müssen in der Zwischenzeit.
Ich schaue heute abend mal. Aktuell ist es unverändert. Aber die SSD hätte längst voll sein müssen in der Zwischenzeit.
olsen_gg
Grand Admiral Special
- Mitglied seit
- 02.03.2012
- Beiträge
- 10.451
- Renomée
- 717
- Standort
- Stralsund
- Aktuelle Projekte
- WCG SCC1, HSTB, wechselnde..
- Lieblingsprojekt
- alle medizinisch / pharmazeutischen Projekte
- Meine Systeme
- Ryzen 9 3900X, 2x Ryzen 7 3700X, ( noch vorhanden: i7-4770S, Lappy i7-3630QM, 13x ARM...)
- BOINC-Statistiken
- Verschiedenes
- Zuviel Details, das muss nicht veröffentlicht werden.
MagicEye04
Grand Admiral Special
- Mitglied seit
- 20.03.2006
- Beiträge
- 23.271
- Renomée
- 1.853
- Standort
- oops,wrong.planet..
- Aktuelle Projekte
- Seti,WCG,Einstein + was gerade Hilfe braucht
- Lieblingsprojekt
- Seti
- Meine Systeme
- R7-1700+GTX1070ti,R7-1700+RadeonVII, FX-8350+GTX1050ti, X4-5350+GT1030, X2-240e+RX460
- BOINC-Statistiken
- Folding@Home-Statistiken
- Mein Laptop
- Dell Latitude E7240
- Prozessor
- R9-3950X (@65W)
- Mainboard
- Asus Prime B550plus
- Kühlung
- TR Macho
- Speicher
- 2x16GiB Corsair LPX2666C16
- Grafikprozessor
- Radeon VII
- Display
- LG 32UD99-W 81,3cm
- SSD
- Crucial MX500-250GB, Samsung EVO280 256GB
- HDD
- Seagate 7200.14 2TB (per eSATAp)
- Optisches Laufwerk
- LG DVDRAM GH24NS90
- Soundkarte
- onboard
- Gehäuse
- Nanoxia Deep Silence1
- Netzteil
- BeQuiet StraightPower 11 550W
- Tastatur
- Cherry RS6000
- Maus
- Logitech RX600
- Betriebssystem
- Ubuntu
- Webbrowser
- Feuerfuchs
- Verschiedenes
- 4x Nanoxia Lüfter (120/140mm) , Festplatte in Bitumenbox
Also ich sehe bei southexchange in der Transaction eine Wallet-Adresse 1MVxDcgMTMCNoxCjiri9ropr41PxwrYFMB und einen hash.Hmm, lädt der doch die ganze Bitcoin Blockchain herunter? Ich dachte das sei bei Electrum nicht nötig...
Schau mal nach dem Speicherplatzverbrauch. Aktuell ist die Blockchain 540GB groß, das könnte dann bissl dauern bis die geladen und verifiziert ist. Du kannst natürlich auch vorher schon mit dem Transaktionshash von Southxchange in einem Blockchain Explorer schauen, ob die Coins deiner neuen Adresse gutgeschrieben wurden.
Der hash führt offenbar nur zu einer Sammeltransaktion, da erkenne ich nix.
Aber wenn ich meine walletadresse in https://www.blockchain.com/explorer angebe, dann ist dort zumindest der Betrag drauf gelandet.
Also offenbar will nur Electrum nicht arbeiten.
Was ich gemacht hatte:
Vorbereitung:
sudo apt install python3-pip python3-setuptools python3-pyqt5 libsecp256k1-dev
sudo apt-get install python3-pyqt5 libsecp256k1-dev python3-cryptography
wget https://download.electrum.org/4.4.6/Electrum-4.4.6.tar.gz
wget https://download.electrum.org/4.4.6/Electrum-4.4.6.tar.gz.asc
Jetzt kam das Überprüfen:
E7240:~$ gpg --verify Electrum-4.4.6.tar.gz.asc
gpg: die unterzeichneten Daten sind wohl in 'Electrum-4.4.6.tar.gz'
gpg: Signatur vom Mo 21 Aug 2023 01:18:31 CEST
gpg: mittels RSA-Schlüssel 637DB1E23370F84AFF88CCE03152347D07DA627C
gpg: Signatur kann nicht geprüft werden: Kein öffentlicher Schlüssel
gpg: Signatur vom Do 17 Aug 2023 22:59:13 CEST
gpg: mittels RSA-Schlüssel 0EEDCFD5CAFB459067349B23CA9EEEC43DF911DC
gpg: Signatur kann nicht geprüft werden: Kein öffentlicher Schlüssel
gpg: Signatur vom Do 17 Aug 2023 21:09:27 CEST
gpg: mittels RSA-Schlüssel 6694D8DE7BE8EE5631BED9502BD5824B7F9470E6
gpg: Signatur kann nicht geprüft werden: Kein öffentlicher Schlüssel
Tja, *schulterzuck*, dann eben ohne Überprüfung.
sudo apt-get install python3-setuptools python3-pip
python3 -m pip install --user Electrum-4.4.6.tar.gz
(hier bin ich mir nicht sicher, ob da nicht ein unbeabsichtigter Zeilenumbruch in der Anleitung stand...)
Endlose Textwüste...
am Ende:
WARNING: The script qtpy is installed in '/home/ich/.local/bin' which is not on PATH.
Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location.
WARNING: The script qr is installed in '/home/ich/.local/bin' which is not on PATH.
Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location.
WARNING: The scripts qdarkstyle, qdarkstyle.example and qdarkstyle.utils are installed in '/home/ich/.local/bin' which is not on PATH.
Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location.
Successfully installed Electrum-4.4.6 aiohttp-3.9.1 aiohttp_socks-0.8.4 aiorpcx-0.22.1 aiosignal-1.3.1 async-timeout-4.0.3 attrs-23.2.0 bitarray-2.9.2 bitstring-4.1.4 dnspython-2.4.2 frozenlist-1.4.1 multidict-6.0.4 protobuf-3.20.3 pypng-0.20220715.0 python-socks-2.4.4 qdarkstyle-3.2.3 qrcode-7.4.2 qtpy-2.4.1 typing-extensions-4.9.0 yarl-1.9.4
Noch mal *schulterzuck*
Immerhin steht da was von successfully. Also einfach mal versucht zu starten:
@E7240:~$ electrum
Der Befehl 'electrum' wurde nicht gefunden, kann aber installiert werden mit:
sudo snap install electrum
Na gut, dann eben so.
@E7240:~$ sudo snap install electrum
electrum 2.6.4-tpaw0 aus Tomas CaseyWilcox (antonwilc0x) installiert
Und das tauchte dann auch im "Startmenu" auf und ich habe es verwendet.
Ist schon ärgerlich, dass es einfach nur nichts macht und nicht mal ne Fehlermeldung anzeigt.
sudo apt install python3-pip python3-setuptools python3-pyqt5 libsecp256k1-dev
sudo apt-get install python3-pyqt5 libsecp256k1-dev python3-cryptography
wget https://download.electrum.org/4.4.6/Electrum-4.4.6.tar.gz
wget https://download.electrum.org/4.4.6/Electrum-4.4.6.tar.gz.asc
Jetzt kam das Überprüfen:
E7240:~$ gpg --verify Electrum-4.4.6.tar.gz.asc
gpg: die unterzeichneten Daten sind wohl in 'Electrum-4.4.6.tar.gz'
gpg: Signatur vom Mo 21 Aug 2023 01:18:31 CEST
gpg: mittels RSA-Schlüssel 637DB1E23370F84AFF88CCE03152347D07DA627C
gpg: Signatur kann nicht geprüft werden: Kein öffentlicher Schlüssel
gpg: Signatur vom Do 17 Aug 2023 22:59:13 CEST
gpg: mittels RSA-Schlüssel 0EEDCFD5CAFB459067349B23CA9EEEC43DF911DC
gpg: Signatur kann nicht geprüft werden: Kein öffentlicher Schlüssel
gpg: Signatur vom Do 17 Aug 2023 21:09:27 CEST
gpg: mittels RSA-Schlüssel 6694D8DE7BE8EE5631BED9502BD5824B7F9470E6
gpg: Signatur kann nicht geprüft werden: Kein öffentlicher Schlüssel
Tja, *schulterzuck*, dann eben ohne Überprüfung.
sudo apt-get install python3-setuptools python3-pip
python3 -m pip install --user Electrum-4.4.6.tar.gz
(hier bin ich mir nicht sicher, ob da nicht ein unbeabsichtigter Zeilenumbruch in der Anleitung stand...)
Endlose Textwüste...
am Ende:
WARNING: The script qtpy is installed in '/home/ich/.local/bin' which is not on PATH.
Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location.
WARNING: The script qr is installed in '/home/ich/.local/bin' which is not on PATH.
Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location.
WARNING: The scripts qdarkstyle, qdarkstyle.example and qdarkstyle.utils are installed in '/home/ich/.local/bin' which is not on PATH.
Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location.
Successfully installed Electrum-4.4.6 aiohttp-3.9.1 aiohttp_socks-0.8.4 aiorpcx-0.22.1 aiosignal-1.3.1 async-timeout-4.0.3 attrs-23.2.0 bitarray-2.9.2 bitstring-4.1.4 dnspython-2.4.2 frozenlist-1.4.1 multidict-6.0.4 protobuf-3.20.3 pypng-0.20220715.0 python-socks-2.4.4 qdarkstyle-3.2.3 qrcode-7.4.2 qtpy-2.4.1 typing-extensions-4.9.0 yarl-1.9.4
Noch mal *schulterzuck*
Immerhin steht da was von successfully. Also einfach mal versucht zu starten:
@E7240:~$ electrum
Der Befehl 'electrum' wurde nicht gefunden, kann aber installiert werden mit:
sudo snap install electrum
Na gut, dann eben so.
@E7240:~$ sudo snap install electrum
electrum 2.6.4-tpaw0 aus Tomas CaseyWilcox (antonwilc0x) installiert
Und das tauchte dann auch im "Startmenu" auf und ich habe es verwendet.
Ist schon ärgerlich, dass es einfach nur nichts macht und nicht mal ne Fehlermeldung anzeigt.
Ich habe Electrum jetzt mal im Terminal gestartet, offenbar ist da wirklich was im Argen. Aber dafür bin ich jetzt schon zu müde.
Fontconfig warning: "/etc/fonts/conf.d/10-hinting-slight.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/10-hinting-slight.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/10-hinting-slight.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/10-hinting-slight.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/10-hinting-slight.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/10-hinting-slight.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/10-hinting-slight.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/11-lcdfilter-default.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/11-lcdfilter-default.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/11-lcdfilter-default.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/11-lcdfilter-default.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/11-lcdfilter-default.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/11-lcdfilter-default.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/11-lcdfilter-default.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/20-unhint-small-vera.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/20-unhint-small-vera.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/20-unhint-small-vera.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/20-unhint-small-vera.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/20-unhint-small-vera.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/20-unhint-small-vera.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/20-unhint-small-vera.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/30-metric-aliases.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/30-metric-aliases.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/30-metric-aliases.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/30-metric-aliases.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/30-metric-aliases.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/30-metric-aliases.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/30-metric-aliases.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/40-nonlatin.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/40-nonlatin.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/40-nonlatin.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/40-nonlatin.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/40-nonlatin.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/40-nonlatin.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/40-nonlatin.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/45-generic.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/45-generic.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/45-generic.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/45-generic.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/45-generic.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/45-generic.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/45-generic.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/45-latin.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/45-latin.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/45-latin.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/45-latin.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/45-latin.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/45-latin.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/45-latin.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/49-sansserif.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/49-sansserif.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/49-sansserif.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/49-sansserif.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/49-sansserif.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/49-sansserif.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/49-sansserif.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/50-user.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/50-user.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/50-user.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/50-user.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/51-local.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/51-local.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/51-local.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/51-local.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/51-local.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/51-local.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/51-local.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/60-generic.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/60-generic.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/60-generic.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/60-generic.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/60-generic.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/60-generic.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/60-generic.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/60-latin.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/60-latin.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/60-latin.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/60-latin.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/60-latin.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/60-latin.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/60-latin.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/65-fonts-persian.conf", line 34: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/65-fonts-persian.conf", line 35: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/65-fonts-persian.conf", line 35: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/65-fonts-persian.conf", line 35: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/65-fonts-persian.conf", line 36: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/65-fonts-persian.conf", line 36: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/65-nonlatin.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/65-nonlatin.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/65-nonlatin.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/65-nonlatin.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/65-nonlatin.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/65-nonlatin.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/65-nonlatin.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/69-unifont.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/69-unifont.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/69-unifont.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/69-unifont.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/69-unifont.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/69-unifont.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/70-no-bitmaps.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/70-no-bitmaps.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/70-no-bitmaps.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/70-no-bitmaps.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/70-no-bitmaps.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/70-no-bitmaps.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/70-no-bitmaps.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/80-delicious.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/80-delicious.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/80-delicious.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/80-delicious.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/80-delicious.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/80-delicious.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/90-synthetic.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/90-synthetic.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/90-synthetic.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/90-synthetic.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/90-synthetic.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/90-synthetic.conf", line 6: invalid attribute 'version'
(process:709054): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
Gtk-Message: Failed to load module "gail"
Gtk-Message: Failed to load module "atk-bridge"
Exception in thread Thread-3:
Traceback (most recent call last):
File "/snap/electrum/2/usr/lib/python2.7/threading.py", line 801, in __bootstrap_inner
self.run()
File "/snap/electrum/2/lib/network.py", line 794, in run
self.wait_on_sockets()
File "/snap/electrum/2/lib/network.py", line 788, in wait_on_sockets
self.process_responses(interface)
File "/snap/electrum/2/lib/network.py", line 578, in process_responses
self.process_response(interface, response, callbacks)
File "/snap/electrum/2/lib/network.py", line 522, in process_response
self.relay_fee = int(result * COIN)
TypeError: unsupported operand type(s) for *: 'NoneType' and 'int'
Gtk-Message: Failed to load module "canberra-gtk-module"
Qt: Session management error: Could not open network socket
Fontconfig warning: "/etc/fonts/conf.d/10-hinting-slight.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/10-hinting-slight.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/10-hinting-slight.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/10-hinting-slight.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/10-hinting-slight.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/10-hinting-slight.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/11-lcdfilter-default.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/11-lcdfilter-default.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/11-lcdfilter-default.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/11-lcdfilter-default.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/11-lcdfilter-default.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/11-lcdfilter-default.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/11-lcdfilter-default.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/20-unhint-small-vera.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/20-unhint-small-vera.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/20-unhint-small-vera.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/20-unhint-small-vera.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/20-unhint-small-vera.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/20-unhint-small-vera.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/20-unhint-small-vera.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/30-metric-aliases.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/30-metric-aliases.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/30-metric-aliases.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/30-metric-aliases.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/30-metric-aliases.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/30-metric-aliases.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/30-metric-aliases.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/40-nonlatin.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/40-nonlatin.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/40-nonlatin.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/40-nonlatin.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/40-nonlatin.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/40-nonlatin.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/40-nonlatin.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/45-generic.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/45-generic.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/45-generic.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/45-generic.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/45-generic.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/45-generic.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/45-generic.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/45-latin.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/45-latin.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/45-latin.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/45-latin.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/45-latin.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/45-latin.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/45-latin.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/49-sansserif.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/49-sansserif.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/49-sansserif.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/49-sansserif.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/49-sansserif.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/49-sansserif.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/49-sansserif.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/50-user.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/50-user.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/50-user.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/50-user.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/51-local.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/51-local.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/51-local.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/51-local.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/51-local.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/51-local.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/51-local.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/60-generic.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/60-generic.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/60-generic.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/60-generic.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/60-generic.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/60-generic.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/60-generic.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/60-latin.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/60-latin.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/60-latin.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/60-latin.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/60-latin.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/60-latin.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/60-latin.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/65-fonts-persian.conf", line 34: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/65-fonts-persian.conf", line 35: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/65-fonts-persian.conf", line 35: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/65-fonts-persian.conf", line 35: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/65-fonts-persian.conf", line 36: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/65-fonts-persian.conf", line 36: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/65-nonlatin.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/65-nonlatin.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/65-nonlatin.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/65-nonlatin.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/65-nonlatin.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/65-nonlatin.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/65-nonlatin.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/69-unifont.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/69-unifont.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/69-unifont.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/69-unifont.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/69-unifont.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/69-unifont.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/70-no-bitmaps.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/70-no-bitmaps.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/70-no-bitmaps.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/70-no-bitmaps.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/70-no-bitmaps.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/70-no-bitmaps.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/70-no-bitmaps.conf", line 8: unknown element "description"
Fontconfig warning: "/etc/fonts/conf.d/80-delicious.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/80-delicious.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/80-delicious.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/80-delicious.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/80-delicious.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/80-delicious.conf", line 6: invalid attribute 'version'
Fontconfig warning: "/etc/fonts/conf.d/90-synthetic.conf", line 4: unknown element "its:rules"
Fontconfig warning: "/etc/fonts/conf.d/90-synthetic.conf", line 5: unknown element "its:translateRule"
Fontconfig error: "/etc/fonts/conf.d/90-synthetic.conf", line 5: invalid attribute 'translate'
Fontconfig error: "/etc/fonts/conf.d/90-synthetic.conf", line 5: invalid attribute 'selector'
Fontconfig error: "/etc/fonts/conf.d/90-synthetic.conf", line 6: invalid attribute 'xmlns:its'
Fontconfig error: "/etc/fonts/conf.d/90-synthetic.conf", line 6: invalid attribute 'version'
(process:709054): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
Gtk-Message: Failed to load module "gail"
Gtk-Message: Failed to load module "atk-bridge"
Exception in thread Thread-3:
Traceback (most recent call last):
File "/snap/electrum/2/usr/lib/python2.7/threading.py", line 801, in __bootstrap_inner
self.run()
File "/snap/electrum/2/lib/network.py", line 794, in run
self.wait_on_sockets()
File "/snap/electrum/2/lib/network.py", line 788, in wait_on_sockets
self.process_responses(interface)
File "/snap/electrum/2/lib/network.py", line 578, in process_responses
self.process_response(interface, response, callbacks)
File "/snap/electrum/2/lib/network.py", line 522, in process_response
self.relay_fee = int(result * COIN)
TypeError: unsupported operand type(s) for *: 'NoneType' and 'int'
Gtk-Message: Failed to load module "canberra-gtk-module"
Qt: Session management error: Could not open network socket
Zuletzt bearbeitet:
koschi
Grand Admiral Special
- Mitglied seit
- 11.11.2001
- Beiträge
- 5.718
- Renomée
- 711
- Standort
- 0511
- Mitglied der Planet 3DNow! Kavallerie!
- Aktuelle Projekte
- sieher Banner
- Lieblingsprojekt
- WCG, Einstein, Universe
- Meine Systeme
- R7 3900X @ 85W + 2 x Vega 56, 8 x Odroid C2, 8 x Odroid XU4, 4 x Odroid N2, 3 x Nvidia Jetson TK1
- BOINC-Statistiken
- Folding@Home-Statistiken
- Prozessor
- R9 3900X
- Mainboard
- Asus PRIME X370 PRO
- Kühlung
- Thermalright Le Grand Macho RT
- Speicher
- 2x32 GB DDR4 Corsair Vengeance LPX 3200@3200
- Grafikprozessor
- 2 x Sapphire Pulse Vega 56
- Display
- LG UltraFine 32UN880-B
- SSD
- Samsung EVO Plus 870 1TB & 850 500GB, Crucial MX500 1TB
- Optisches Laufwerk
- PIONEER BDR-209DBK
- Soundkarte
- Nubert nuPro A-20 (USB), Pioneer SE-MS7BT(K) (BT)
- Gehäuse
- Fractal Design Define R5 PCGH
- Netzteil
- BeQuiet! StraightPower 11 850W
- Betriebssystem
- Ubuntu LTS
- Internetanbindung
- ▼220 ▲40
Scheint du hast die Pythoninstallation gewählt, ja?
Das app image funktioniert bei mir prächtig, konnte sogar meine alte Wallet wieder öffnen. Nach wenigen Sekunden Synchronising war der Kontostand wieder da.
Wenn du unter Tools und dann Network schaust, hast du dort 10 Verbindungen?
Das app image funktioniert bei mir prächtig, konnte sogar meine alte Wallet wieder öffnen. Nach wenigen Sekunden Synchronising war der Kontostand wieder da.
Wenn du unter Tools und dann Network schaust, hast du dort 10 Verbindungen?
MagicEye04
Grand Admiral Special
- Mitglied seit
- 20.03.2006
- Beiträge
- 23.271
- Renomée
- 1.853
- Standort
- oops,wrong.planet..
- Aktuelle Projekte
- Seti,WCG,Einstein + was gerade Hilfe braucht
- Lieblingsprojekt
- Seti
- Meine Systeme
- R7-1700+GTX1070ti,R7-1700+RadeonVII, FX-8350+GTX1050ti, X4-5350+GT1030, X2-240e+RX460
- BOINC-Statistiken
- Folding@Home-Statistiken
- Mein Laptop
- Dell Latitude E7240
- Prozessor
- R9-3950X (@65W)
- Mainboard
- Asus Prime B550plus
- Kühlung
- TR Macho
- Speicher
- 2x16GiB Corsair LPX2666C16
- Grafikprozessor
- Radeon VII
- Display
- LG 32UD99-W 81,3cm
- SSD
- Crucial MX500-250GB, Samsung EVO280 256GB
- HDD
- Seagate 7200.14 2TB (per eSATAp)
- Optisches Laufwerk
- LG DVDRAM GH24NS90
- Soundkarte
- onboard
- Gehäuse
- Nanoxia Deep Silence1
- Netzteil
- BeQuiet StraightPower 11 550W
- Tastatur
- Cherry RS6000
- Maus
- Logitech RX600
- Betriebssystem
- Ubuntu
- Webbrowser
- Feuerfuchs
- Verschiedenes
- 4x Nanoxia Lüfter (120/140mm) , Festplatte in Bitumenbox
Ich habe erst mit dem Python angefangen und als es nicht starten wollte, habe ich wie von Ubuntu vorgeschlagen, das Snap probiert.
app image? Ist das ein backup tool?
Network sieht bei mir so aus:
Inzwischen habe ich es auch noch mal auf einem anderen Rechner probiert, dort aber gleich als snap.
Dann habe ich die bestehende Wallet über die notierten Seeds wiederherstellen wollen.
Aber irgendwie das Gleiche: Errors, Warnings, Synchronizing und kein Ende.
Ich hätte gedacht, bei einem snap ist alles dabei und es kann dann nicht mehr an fehlenden Abhängigkeiten scheitern?
app image? Ist das ein backup tool?
Network sieht bei mir so aus:
Inzwischen habe ich es auch noch mal auf einem anderen Rechner probiert, dort aber gleich als snap.
Dann habe ich die bestehende Wallet über die notierten Seeds wiederherstellen wollen.
Aber irgendwie das Gleiche: Errors, Warnings, Synchronizing und kein Ende.
Ich hätte gedacht, bei einem snap ist alles dabei und es kann dann nicht mehr an fehlenden Abhängigkeiten scheitern?
Zuletzt bearbeitet:
olsen_gg
Grand Admiral Special
- Mitglied seit
- 02.03.2012
- Beiträge
- 10.451
- Renomée
- 717
- Standort
- Stralsund
- Aktuelle Projekte
- WCG SCC1, HSTB, wechselnde..
- Lieblingsprojekt
- alle medizinisch / pharmazeutischen Projekte
- Meine Systeme
- Ryzen 9 3900X, 2x Ryzen 7 3700X, ( noch vorhanden: i7-4770S, Lappy i7-3630QM, 13x ARM...)
- BOINC-Statistiken
- Verschiedenes
- Zuviel Details, das muss nicht veröffentlicht werden.
Boah. Das macht mir Mut für meinen eigenen Umzug aufs neue Gerät.
koschi
Grand Admiral Special
- Mitglied seit
- 11.11.2001
- Beiträge
- 5.718
- Renomée
- 711
- Standort
- 0511
- Mitglied der Planet 3DNow! Kavallerie!
- Aktuelle Projekte
- sieher Banner
- Lieblingsprojekt
- WCG, Einstein, Universe
- Meine Systeme
- R7 3900X @ 85W + 2 x Vega 56, 8 x Odroid C2, 8 x Odroid XU4, 4 x Odroid N2, 3 x Nvidia Jetson TK1
- BOINC-Statistiken
- Folding@Home-Statistiken
- Prozessor
- R9 3900X
- Mainboard
- Asus PRIME X370 PRO
- Kühlung
- Thermalright Le Grand Macho RT
- Speicher
- 2x32 GB DDR4 Corsair Vengeance LPX 3200@3200
- Grafikprozessor
- 2 x Sapphire Pulse Vega 56
- Display
- LG UltraFine 32UN880-B
- SSD
- Samsung EVO Plus 870 1TB & 850 500GB, Crucial MX500 1TB
- Optisches Laufwerk
- PIONEER BDR-209DBK
- Soundkarte
- Nubert nuPro A-20 (USB), Pioneer SE-MS7BT(K) (BT)
- Gehäuse
- Fractal Design Define R5 PCGH
- Netzteil
- BeQuiet! StraightPower 11 850W
- Betriebssystem
- Ubuntu LTS
- Internetanbindung
- ▼220 ▲40
Den hab ich gezogen ausführbar gemacht und dann ging das. Sieht auch leicht anders aus:
Anhänge
MagicEye04
Grand Admiral Special
- Mitglied seit
- 20.03.2006
- Beiträge
- 23.271
- Renomée
- 1.853
- Standort
- oops,wrong.planet..
- Aktuelle Projekte
- Seti,WCG,Einstein + was gerade Hilfe braucht
- Lieblingsprojekt
- Seti
- Meine Systeme
- R7-1700+GTX1070ti,R7-1700+RadeonVII, FX-8350+GTX1050ti, X4-5350+GT1030, X2-240e+RX460
- BOINC-Statistiken
- Folding@Home-Statistiken
- Mein Laptop
- Dell Latitude E7240
- Prozessor
- R9-3950X (@65W)
- Mainboard
- Asus Prime B550plus
- Kühlung
- TR Macho
- Speicher
- 2x16GiB Corsair LPX2666C16
- Grafikprozessor
- Radeon VII
- Display
- LG 32UD99-W 81,3cm
- SSD
- Crucial MX500-250GB, Samsung EVO280 256GB
- HDD
- Seagate 7200.14 2TB (per eSATAp)
- Optisches Laufwerk
- LG DVDRAM GH24NS90
- Soundkarte
- onboard
- Gehäuse
- Nanoxia Deep Silence1
- Netzteil
- BeQuiet StraightPower 11 550W
- Tastatur
- Cherry RS6000
- Maus
- Logitech RX600
- Betriebssystem
- Ubuntu
- Webbrowser
- Feuerfuchs
- Verschiedenes
- 4x Nanoxia Lüfter (120/140mm) , Festplatte in Bitumenbox
Das habe ich jetzt auch probiert. Gestartet, wallet aus dem seed wiederhergestellt, klappt.
Langsam nervt es ein wenig, dass es bei Ubuntu so viele verschiedene Möglichkeiten gibt, ein Programm zu installieren. Vor Allem, wenn die beiden mehr oder weniger klassischen Möglichkeiten (repo und snap) einfach mal nicht funktionieren. Da ist mir so ein App-Image gleich mal sehr sympathisch, es scheint ja wirklich alles incl. zu sein.
Langsam nervt es ein wenig, dass es bei Ubuntu so viele verschiedene Möglichkeiten gibt, ein Programm zu installieren. Vor Allem, wenn die beiden mehr oder weniger klassischen Möglichkeiten (repo und snap) einfach mal nicht funktionieren. Da ist mir so ein App-Image gleich mal sehr sympathisch, es scheint ja wirklich alles incl. zu sein.
koschi
Grand Admiral Special
- Mitglied seit
- 11.11.2001
- Beiträge
- 5.718
- Renomée
- 711
- Standort
- 0511
- Mitglied der Planet 3DNow! Kavallerie!
- Aktuelle Projekte
- sieher Banner
- Lieblingsprojekt
- WCG, Einstein, Universe
- Meine Systeme
- R7 3900X @ 85W + 2 x Vega 56, 8 x Odroid C2, 8 x Odroid XU4, 4 x Odroid N2, 3 x Nvidia Jetson TK1
- BOINC-Statistiken
- Folding@Home-Statistiken
- Prozessor
- R9 3900X
- Mainboard
- Asus PRIME X370 PRO
- Kühlung
- Thermalright Le Grand Macho RT
- Speicher
- 2x32 GB DDR4 Corsair Vengeance LPX 3200@3200
- Grafikprozessor
- 2 x Sapphire Pulse Vega 56
- Display
- LG UltraFine 32UN880-B
- SSD
- Samsung EVO Plus 870 1TB & 850 500GB, Crucial MX500 1TB
- Optisches Laufwerk
- PIONEER BDR-209DBK
- Soundkarte
- Nubert nuPro A-20 (USB), Pioneer SE-MS7BT(K) (BT)
- Gehäuse
- Fractal Design Define R5 PCGH
- Netzteil
- BeQuiet! StraightPower 11 850W
- Betriebssystem
- Ubuntu LTS
- Internetanbindung
- ▼220 ▲40
Ich rechne an sich damit, dass Universe demnächst greylistet wird, heißt es gibt dann erstmal keine Magnitude mehr bis wieder WUs kommen. Bis das vollzogen ist, steigt meine Gesamtmagnitude aber, da weiterhin auf Universe ausgeschüttet wird (und der RAC sinkt für alle gleichmäßig langsam gegen 0) und ich derweil aber auch schon Magnitude von anderen Projekten bekomme.
Zuletzt bearbeitet:
MagicEye04
Grand Admiral Special
- Mitglied seit
- 20.03.2006
- Beiträge
- 23.271
- Renomée
- 1.853
- Standort
- oops,wrong.planet..
- Aktuelle Projekte
- Seti,WCG,Einstein + was gerade Hilfe braucht
- Lieblingsprojekt
- Seti
- Meine Systeme
- R7-1700+GTX1070ti,R7-1700+RadeonVII, FX-8350+GTX1050ti, X4-5350+GT1030, X2-240e+RX460
- BOINC-Statistiken
- Folding@Home-Statistiken
- Mein Laptop
- Dell Latitude E7240
- Prozessor
- R9-3950X (@65W)
- Mainboard
- Asus Prime B550plus
- Kühlung
- TR Macho
- Speicher
- 2x16GiB Corsair LPX2666C16
- Grafikprozessor
- Radeon VII
- Display
- LG 32UD99-W 81,3cm
- SSD
- Crucial MX500-250GB, Samsung EVO280 256GB
- HDD
- Seagate 7200.14 2TB (per eSATAp)
- Optisches Laufwerk
- LG DVDRAM GH24NS90
- Soundkarte
- onboard
- Gehäuse
- Nanoxia Deep Silence1
- Netzteil
- BeQuiet StraightPower 11 550W
- Tastatur
- Cherry RS6000
- Maus
- Logitech RX600
- Betriebssystem
- Ubuntu
- Webbrowser
- Feuerfuchs
- Verschiedenes
- 4x Nanoxia Lüfter (120/140mm) , Festplatte in Bitumenbox
Ich hatte es leider verpasst, mir den Bunker noch vollzuhauen.
olsen_gg
Grand Admiral Special
- Mitglied seit
- 02.03.2012
- Beiträge
- 10.451
- Renomée
- 717
- Standort
- Stralsund
- Aktuelle Projekte
- WCG SCC1, HSTB, wechselnde..
- Lieblingsprojekt
- alle medizinisch / pharmazeutischen Projekte
- Meine Systeme
- Ryzen 9 3900X, 2x Ryzen 7 3700X, ( noch vorhanden: i7-4770S, Lappy i7-3630QM, 13x ARM...)
- BOINC-Statistiken
- Verschiedenes
- Zuviel Details, das muss nicht veröffentlicht werden.
dito
MagicEye04
Grand Admiral Special
- Mitglied seit
- 20.03.2006
- Beiträge
- 23.271
- Renomée
- 1.853
- Standort
- oops,wrong.planet..
- Aktuelle Projekte
- Seti,WCG,Einstein + was gerade Hilfe braucht
- Lieblingsprojekt
- Seti
- Meine Systeme
- R7-1700+GTX1070ti,R7-1700+RadeonVII, FX-8350+GTX1050ti, X4-5350+GT1030, X2-240e+RX460
- BOINC-Statistiken
- Folding@Home-Statistiken
- Mein Laptop
- Dell Latitude E7240
- Prozessor
- R9-3950X (@65W)
- Mainboard
- Asus Prime B550plus
- Kühlung
- TR Macho
- Speicher
- 2x16GiB Corsair LPX2666C16
- Grafikprozessor
- Radeon VII
- Display
- LG 32UD99-W 81,3cm
- SSD
- Crucial MX500-250GB, Samsung EVO280 256GB
- HDD
- Seagate 7200.14 2TB (per eSATAp)
- Optisches Laufwerk
- LG DVDRAM GH24NS90
- Soundkarte
- onboard
- Gehäuse
- Nanoxia Deep Silence1
- Netzteil
- BeQuiet StraightPower 11 550W
- Tastatur
- Cherry RS6000
- Maus
- Logitech RX600
- Betriebssystem
- Ubuntu
- Webbrowser
- Feuerfuchs
- Verschiedenes
- 4x Nanoxia Lüfter (120/140mm) , Festplatte in Bitumenbox
Bei gridcoinstats sehe ich es schon nicht mehr.Ich rechne an sich damit, dass Universe demnächst greylistet wird
Ich muss mal meckern, vielleicht hilft - das passt nicht zusammen:
Estimated staking frequency: 1.25 / month
Time since last stake: 1 month, 4 days, 9 hours
olsen_gg
Grand Admiral Special
- Mitglied seit
- 02.03.2012
- Beiträge
- 10.451
- Renomée
- 717
- Standort
- Stralsund
- Aktuelle Projekte
- WCG SCC1, HSTB, wechselnde..
- Lieblingsprojekt
- alle medizinisch / pharmazeutischen Projekte
- Meine Systeme
- Ryzen 9 3900X, 2x Ryzen 7 3700X, ( noch vorhanden: i7-4770S, Lappy i7-3630QM, 13x ARM...)
- BOINC-Statistiken
- Verschiedenes
- Zuviel Details, das muss nicht veröffentlicht werden.
Statistik halt. Geht mir aber auch nicht besser.
MagicEye04
Grand Admiral Special
- Mitglied seit
- 20.03.2006
- Beiträge
- 23.271
- Renomée
- 1.853
- Standort
- oops,wrong.planet..
- Aktuelle Projekte
- Seti,WCG,Einstein + was gerade Hilfe braucht
- Lieblingsprojekt
- Seti
- Meine Systeme
- R7-1700+GTX1070ti,R7-1700+RadeonVII, FX-8350+GTX1050ti, X4-5350+GT1030, X2-240e+RX460
- BOINC-Statistiken
- Folding@Home-Statistiken
- Mein Laptop
- Dell Latitude E7240
- Prozessor
- R9-3950X (@65W)
- Mainboard
- Asus Prime B550plus
- Kühlung
- TR Macho
- Speicher
- 2x16GiB Corsair LPX2666C16
- Grafikprozessor
- Radeon VII
- Display
- LG 32UD99-W 81,3cm
- SSD
- Crucial MX500-250GB, Samsung EVO280 256GB
- HDD
- Seagate 7200.14 2TB (per eSATAp)
- Optisches Laufwerk
- LG DVDRAM GH24NS90
- Soundkarte
- onboard
- Gehäuse
- Nanoxia Deep Silence1
- Netzteil
- BeQuiet StraightPower 11 550W
- Tastatur
- Cherry RS6000
- Maus
- Logitech RX600
- Betriebssystem
- Ubuntu
- Webbrowser
- Feuerfuchs
- Verschiedenes
- 4x Nanoxia Lüfter (120/140mm) , Festplatte in Bitumenbox
Meckern hat geholfen, irgendwann heute früh gabs endlich coins.
olsen_gg
Grand Admiral Special
- Mitglied seit
- 02.03.2012
- Beiträge
- 10.451
- Renomée
- 717
- Standort
- Stralsund
- Aktuelle Projekte
- WCG SCC1, HSTB, wechselnde..
- Lieblingsprojekt
- alle medizinisch / pharmazeutischen Projekte
- Meine Systeme
- Ryzen 9 3900X, 2x Ryzen 7 3700X, ( noch vorhanden: i7-4770S, Lappy i7-3630QM, 13x ARM...)
- BOINC-Statistiken
- Verschiedenes
- Zuviel Details, das muss nicht veröffentlicht werden.
Und wiedermal mit Staking dran gewesen - sagenhafte 117 GRC eingekrallt.
Mit etwas Glück also ca. 1€
Äh, Stromkosten im selben Zeitraum (nur) ca, 23€. passt schon.
Mit etwas Glück also ca. 1€
Doppelposting wurde automatisch zusammengeführt:
Äh, Stromkosten im selben Zeitraum (nur) ca, 23€. passt schon.
Zuletzt bearbeitet:
koschi
Grand Admiral Special
- Mitglied seit
- 11.11.2001
- Beiträge
- 5.718
- Renomée
- 711
- Standort
- 0511
- Mitglied der Planet 3DNow! Kavallerie!
- Aktuelle Projekte
- sieher Banner
- Lieblingsprojekt
- WCG, Einstein, Universe
- Meine Systeme
- R7 3900X @ 85W + 2 x Vega 56, 8 x Odroid C2, 8 x Odroid XU4, 4 x Odroid N2, 3 x Nvidia Jetson TK1
- BOINC-Statistiken
- Folding@Home-Statistiken
- Prozessor
- R9 3900X
- Mainboard
- Asus PRIME X370 PRO
- Kühlung
- Thermalright Le Grand Macho RT
- Speicher
- 2x32 GB DDR4 Corsair Vengeance LPX 3200@3200
- Grafikprozessor
- 2 x Sapphire Pulse Vega 56
- Display
- LG UltraFine 32UN880-B
- SSD
- Samsung EVO Plus 870 1TB & 850 500GB, Crucial MX500 1TB
- Optisches Laufwerk
- PIONEER BDR-209DBK
- Soundkarte
- Nubert nuPro A-20 (USB), Pioneer SE-MS7BT(K) (BT)
- Gehäuse
- Fractal Design Define R5 PCGH
- Netzteil
- BeQuiet! StraightPower 11 850W
- Betriebssystem
- Ubuntu LTS
- Internetanbindung
- ▼220 ▲40
Die Gewinne werden nicht aus Wertzuwächsen des Gridcoin kommen, sondern aus den ertauschten Bitcoin.
Bitcoin ist >40% gestiegen im letzten Monat, 167% im letzten Jahr.
Ich war daher heute mal mutig und habe erstmals 10k zu FreiExchange geschickt und eine Sell Order zu 0.00000015 BTC/GRC eingestellt. Mal gucken ob sich die ggf. über das Wochenende füllt, ansonsten verkaufe ich zum Marktpreis, aktuell bei 0.00000013.
Bitcoin ist >40% gestiegen im letzten Monat, 167% im letzten Jahr.
Ich war daher heute mal mutig und habe erstmals 10k zu FreiExchange geschickt und eine Sell Order zu 0.00000015 BTC/GRC eingestellt. Mal gucken ob sich die ggf. über das Wochenende füllt, ansonsten verkaufe ich zum Marktpreis, aktuell bei 0.00000013.
olsen_gg
Grand Admiral Special
- Mitglied seit
- 02.03.2012
- Beiträge
- 10.451
- Renomée
- 717
- Standort
- Stralsund
- Aktuelle Projekte
- WCG SCC1, HSTB, wechselnde..
- Lieblingsprojekt
- alle medizinisch / pharmazeutischen Projekte
- Meine Systeme
- Ryzen 9 3900X, 2x Ryzen 7 3700X, ( noch vorhanden: i7-4770S, Lappy i7-3630QM, 13x ARM...)
- BOINC-Statistiken
- Verschiedenes
- Zuviel Details, das muss nicht veröffentlicht werden.
Darauf werde ich min. noch 1-2 Jahre warten müssen, ich habe gerade mal 8900 GRC zusammen...
Und gute 5k GRC brauchts, um einigermaßen staken zu können.
Und gute 5k GRC brauchts, um einigermaßen staken zu können.
MagicEye04
Grand Admiral Special
- Mitglied seit
- 20.03.2006
- Beiträge
- 23.271
- Renomée
- 1.853
- Standort
- oops,wrong.planet..
- Aktuelle Projekte
- Seti,WCG,Einstein + was gerade Hilfe braucht
- Lieblingsprojekt
- Seti
- Meine Systeme
- R7-1700+GTX1070ti,R7-1700+RadeonVII, FX-8350+GTX1050ti, X4-5350+GT1030, X2-240e+RX460
- BOINC-Statistiken
- Folding@Home-Statistiken
- Mein Laptop
- Dell Latitude E7240
- Prozessor
- R9-3950X (@65W)
- Mainboard
- Asus Prime B550plus
- Kühlung
- TR Macho
- Speicher
- 2x16GiB Corsair LPX2666C16
- Grafikprozessor
- Radeon VII
- Display
- LG 32UD99-W 81,3cm
- SSD
- Crucial MX500-250GB, Samsung EVO280 256GB
- HDD
- Seagate 7200.14 2TB (per eSATAp)
- Optisches Laufwerk
- LG DVDRAM GH24NS90
- Soundkarte
- onboard
- Gehäuse
- Nanoxia Deep Silence1
- Netzteil
- BeQuiet StraightPower 11 550W
- Tastatur
- Cherry RS6000
- Maus
- Logitech RX600
- Betriebssystem
- Ubuntu
- Webbrowser
- Feuerfuchs
- Verschiedenes
- 4x Nanoxia Lüfter (120/140mm) , Festplatte in Bitumenbox
Gridcoinstats zeigt mir aktuell mal wieder kaum aktuelle Daten an.
Zum Einen fehlen dort ein paar GRC (in der Wallet sind es 9513,x) und zum Anderen ist nur Einstein und Asteroids in der Projektliste, obwohl ich in den letzten Tagen ziemlich viele andere Projekte gerechnet hatte (milkyway, rosetta, numberfields).
Ist das nur ein Anzeigefehler oder sollte ich da mal irgendwie nachhaken?
Das staking kam auf die gleiche Adresse wie immer.
Zum Einen fehlen dort ein paar GRC (in der Wallet sind es 9513,x) und zum Anderen ist nur Einstein und Asteroids in der Projektliste, obwohl ich in den letzten Tagen ziemlich viele andere Projekte gerechnet hatte (milkyway, rosetta, numberfields).
Ist das nur ein Anzeigefehler oder sollte ich da mal irgendwie nachhaken?
Das staking kam auf die gleiche Adresse wie immer.
koschi
Grand Admiral Special
- Mitglied seit
- 11.11.2001
- Beiträge
- 5.718
- Renomée
- 711
- Standort
- 0511
- Mitglied der Planet 3DNow! Kavallerie!
- Aktuelle Projekte
- sieher Banner
- Lieblingsprojekt
- WCG, Einstein, Universe
- Meine Systeme
- R7 3900X @ 85W + 2 x Vega 56, 8 x Odroid C2, 8 x Odroid XU4, 4 x Odroid N2, 3 x Nvidia Jetson TK1
- BOINC-Statistiken
- Folding@Home-Statistiken
- Prozessor
- R9 3900X
- Mainboard
- Asus PRIME X370 PRO
- Kühlung
- Thermalright Le Grand Macho RT
- Speicher
- 2x32 GB DDR4 Corsair Vengeance LPX 3200@3200
- Grafikprozessor
- 2 x Sapphire Pulse Vega 56
- Display
- LG UltraFine 32UN880-B
- SSD
- Samsung EVO Plus 870 1TB & 850 500GB, Crucial MX500 1TB
- Optisches Laufwerk
- PIONEER BDR-209DBK
- Soundkarte
- Nubert nuPro A-20 (USB), Pioneer SE-MS7BT(K) (BT)
- Gehäuse
- Fractal Design Define R5 PCGH
- Netzteil
- BeQuiet! StraightPower 11 850W
- Betriebssystem
- Ubuntu LTS
- Internetanbindung
- ▼220 ▲40
Im Zweifel immer die eigene Wallet fragen, in der "Researcher Configuration" siehst du ja welche CPID bei welchem Projekt ist und wo dir Magnitude angerechnet wird. Wenn da alles passt, dann sind es nur Anzeigefehler bei Gridcoinstats.
Falls du einen CPID Split hast must du versuchen wieder alle Projekte unter eine CPID zu bekommen.
Falls du einen CPID Split hast must du versuchen wieder alle Projekte unter eine CPID zu bekommen.
MagicEye04
Grand Admiral Special
- Mitglied seit
- 20.03.2006
- Beiträge
- 23.271
- Renomée
- 1.853
- Standort
- oops,wrong.planet..
- Aktuelle Projekte
- Seti,WCG,Einstein + was gerade Hilfe braucht
- Lieblingsprojekt
- Seti
- Meine Systeme
- R7-1700+GTX1070ti,R7-1700+RadeonVII, FX-8350+GTX1050ti, X4-5350+GT1030, X2-240e+RX460
- BOINC-Statistiken
- Folding@Home-Statistiken
- Mein Laptop
- Dell Latitude E7240
- Prozessor
- R9-3950X (@65W)
- Mainboard
- Asus Prime B550plus
- Kühlung
- TR Macho
- Speicher
- 2x16GiB Corsair LPX2666C16
- Grafikprozessor
- Radeon VII
- Display
- LG 32UD99-W 81,3cm
- SSD
- Crucial MX500-250GB, Samsung EVO280 256GB
- HDD
- Seagate 7200.14 2TB (per eSATAp)
- Optisches Laufwerk
- LG DVDRAM GH24NS90
- Soundkarte
- onboard
- Gehäuse
- Nanoxia Deep Silence1
- Netzteil
- BeQuiet StraightPower 11 550W
- Tastatur
- Cherry RS6000
- Maus
- Logitech RX600
- Betriebssystem
- Ubuntu
- Webbrowser
- Feuerfuchs
- Verschiedenes
- 4x Nanoxia Lüfter (120/140mm) , Festplatte in Bitumenbox
Jupp, in der Wallet sieht alles gut aus.
herby44
Vice Admiral Special
- Mitglied seit
- 14.09.2016
- Beiträge
- 684
- Renomée
- 222
- Standort
- Niedersachsen
- Aktuelle Projekte
- WCG, TN-Grid, Collatz, Asteroids, Seti, Climate Prediction, und andere
- Meine Systeme
- 3 X R7-1700, 1 X R5-3400GE, 1 X i7-7700T, 1 X i7-7700, 2 X 3950XT, 5 X 3900XT; 2 X 5950XT, 2 X 4650G, 1 X 4750G, 1 X 5700G
- BOINC-Statistiken
Für Gridcoin gibt es mal wieder eine neue Software Version 5.4.6.0
olsen_gg
Grand Admiral Special
- Mitglied seit
- 02.03.2012
- Beiträge
- 10.451
- Renomée
- 717
- Standort
- Stralsund
- Aktuelle Projekte
- WCG SCC1, HSTB, wechselnde..
- Lieblingsprojekt
- alle medizinisch / pharmazeutischen Projekte
- Meine Systeme
- Ryzen 9 3900X, 2x Ryzen 7 3700X, ( noch vorhanden: i7-4770S, Lappy i7-3630QM, 13x ARM...)
- BOINC-Statistiken
- Verschiedenes
- Zuviel Details, das muss nicht veröffentlicht werden.
Oha: 51,83 GRC gestaked. Dat geht ab wie Schmidts Katze.
Ich hatte noch gar nicht wieder damit gerechnet.
Aha, nun habe ich es da. Erst ein Backup machen, wenn ja, welche Dateien?
Gridcoin beenden vorher?
Ich hatte noch gar nicht wieder damit gerechnet.
Doppelposting wurde automatisch zusammengeführt:
Ich kriege es nicht mal heruntergeladen. Irgendein Denkfehler?Für Gridcoin gibt es mal wieder eine neue Software Version 5.4.6.0
Doppelposting wurde automatisch zusammengeführt:
Aha, nun habe ich es da. Erst ein Backup machen, wenn ja, welche Dateien?
Gridcoin beenden vorher?
Zuletzt bearbeitet: